Datasheet Texas Instruments OPA2541SMQ — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | OPA2541 |
| Numero de parte | OPA2541SMQ |
Amplificador operacional dual de alta potencia 8-TO-3 -40 a 125
Hojas de datos
Dual High Power Operational Amplifier datasheet
PDF, 155 Kb, Archivo publicado: sept 27, 2000
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 8 | 8 |
| Package Type | LMF | LMF |
| Industry STD Term | TO-CAN | TO-CAN |
| JEDEC Code | O-MBCY-W | O-MBCY-W |
| Package QTY | 1 | 1 |
| Carrier | TUBE | TUBE |
| Device Marking | OPA2541SMQ | OPA2541 |
| Width (mm) | 25.4 | 25.4 |
| Length (mm) | 38.86 | 38.86 |
| Thickness (mm) | 7.11 | 7.11 |
| Pitch (mm) | 6.35 | 6.35 |
| Max Height (mm) | 7.62 | 7.62 |
| Mechanical Data | Descargar | Descargar |
Paramétricos
| Additional Features | N/A |
| Architecture | FET |
| CMRR(Min) | 95 dB |
| CMRR(Typ) | 106 dB |
| GBW(Typ) | 1.6 MHz |
| Input Bias Current(Max) | 50 pA |
| Iq per channel(Max) | 25 mA |
| Iq per channel(Typ) | 20 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 15 uV/C |
| Operating Temperature Range | -40 to 125,-55 to 125 C |
| Output Current(Typ) | 7000 mA |
| Package Group | TO-3 |
| Package Size: mm2:W x L | 8TO-3: 974 mm2: 25.4 x 38.35(TO-3) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 8 V/us |
| Total Supply Voltage(Max) | 80 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 20 +5V=5, +/-5V=10 |
| Vos (Offset Voltage @ 25C)(Max) | 1 mV |
Plan ecológico
| RoHS | Obediente |
| Pb gratis | Sí |
Notas de aplicación
- Mounting Considerations for TO-3 PackagesPDF, 73 Kb, Archivo publicado: sept 27, 2000
Proper mounting of TO-3 packages is required to assure rated performance and reliability. Although the procedures are simple, ignoring them can result in poor performance and catastrophic failure of the device. - Power Amplifier Stress and Power Handling LimitationsPDF, 55 Kb, Archivo publicado: sept 27, 2000
To achieve reliable power amplifier designs you must consider the stress on the amplifier compared to its power handling limitations. Power handling limits are specified by the Safe Operating Area (SOA) curves of the power amp. Stress on the amplifier depends on amplifier load and signal conditions which can be evaluated with straightforward techniques. - Tuning in AmplifiersPDF, 44 Kb, Archivo publicado: oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, Archivo publicado: oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, Archivo publicado: oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Linea modelo
Serie: OPA2541 (5)
- OPA2541AM OPA2541AM-BI OPA2541BM OPA2541SM OPA2541SMQ
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Power Op Amps