Datasheet Texas Instruments LM5085MME/NOPB — Ficha de datos
Fabricante | Texas Instruments |
Serie | LM5085 |
Numero de parte | LM5085MME/NOPB |
4.5-75V Wide Vin, Controlador de Buck PFET no síncrono constante a tiempo 8-VSSOP -40 a 125
Hojas de datos
LM5085/-Q1 75-V Constant On-Time PFET Buck Switching Controller datasheet
PDF, 1.6 Mb, Revisión: I, Archivo publicado: agosto 12, 2015
Extracto del documento
Precios
Estado
Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
Disponibilidad de muestra del fabricante | Sí |
Embalaje
Pin | 8 |
Package Type | DGK |
Industry STD Term | VSSOP |
JEDEC Code | R-PDSO-G |
Package QTY | 250 |
Carrier | SMALL T&R |
Device Marking | SSTB |
Width (mm) | 3 |
Length (mm) | 3 |
Thickness (mm) | .97 |
Pitch (mm) | .65 |
Max Height (mm) | 1.07 |
Mechanical Data | Descargar |
Paramétricos
Control Mode | Constant on-time (COT) |
Duty Cycle(Max) | 100 % |
Iout(Max) | 10 A |
Iq(Typ) | 1.3 mA |
Number of Phases | 1 |
Operating Temperature Range | -40 to 125 C |
Package Group | VSSOP |
Rating | Catalog |
Regulated Outputs | 1 |
Special Features | Adjustable Current Limit,Enable,Frequency Synchronization |
Switching Frequency(Max) | 1000 kHz |
Switching Frequency(Min) | 50 kHz |
Type | Controller |
Vin(Max) | 75 V |
Vin(Min) | 4.5 V |
Vout(Max) | 75 V |
Vout(Min) | 1.25 V |
Plan ecológico
RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: LM5085EVAL
LM5085 - 75V Wide Vin Constant On-Time PFET Buck Switching Controller Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Constant Current Constant Voltage Buck Converter w/LM25085 (Rev. A)PDF, 377 Kb, Revisión: A, Archivo publicado: abr 23, 2013
In many applications, a constant-current constant-voltage (CC/CV) dc source is needed. The I-Vcharacteristic of a constant-current constant-voltage (CC/CV) source is shown in Figure 1. This applicationreport presents an external op-amp based accurate current limit circuit suitable for CC/CV operation whenthe required constant current range is very narrow. - Designing Non-Invert Buck-Boost (Zeta) Cnvrts w/a Buck P-FET CntrlPDF, 299 Kb, Archivo publicado: abr 22, 2011
- Transient Response versus Ripple – An Analysis of Ripple Injection TechniquesPDF, 2.9 Mb, Archivo publicado: abr 28, 2014
In this application note the implications of ripple injection techniques, aimed at minimizingoutput ripple voltage, on the transient response of a supply are highlighted. The results help choose a suitable ripple injection technique after striking a balance between the output ripple voltage and the transient response required by the load. - Reduce buck-converter EMI and voltage stress by minimizing inductive parasiticsPDF, 926 Kb, Archivo publicado: jul 21, 2016
Linea modelo
Serie: LM5085 (9)
Clasificación del fabricante
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Controller (External Switch)