Datasheet Texas Instruments ADC12D1800RFIUT/NOPB — Ficha de datos
Fabricante | Texas Instruments |
Serie | ADC12D1800RF |
Numero de parte | ADC12D1800RFIUT/NOPB |
12 bits, doble 1.8-GSPS o simple 3.6-SPS, convertidor analógico a digital de muestreo de RF (ADC) 292-BGA -40 a 85
Hojas de datos
ADC12D1800RF 12-Bit, Single 3.6 GSPS RF Sampling ADC datasheet
PDF, 3.6 Mb, Revisión: J, Archivo publicado: nov 11, 2014
Extracto del documento
Precios
Estado
Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
Disponibilidad de muestra del fabricante | Sí |
Embalaje
Pin | 292 |
Package Type | NXA |
Industry STD Term | BGA |
JEDEC Code | S-PBGA-N |
Package QTY | 40 |
Carrier | JEDEC TRAY (10+1) |
Device Marking | ADC12D1800RFIUT |
Width (mm) | 27 |
Length (mm) | 27 |
Thickness (mm) | 2.38 |
Pitch (mm) | 1.27 |
Max Height (mm) | 2.4 |
Mechanical Data | Descargar |
Paramétricos
# Input Channels | 2,1 |
Analog Input BW | 2700 MHz |
Architecture | Folding Interpolating |
DNL(Max) | 0.4 +/-LSB |
DNL(Typ) | 0.4 +/-LSB |
ENOB | 9.3 Bits |
INL(Max) | 2.5 +/-LSB |
INL(Typ) | 2.5 +/-LSB |
Input Buffer | Yes |
Input Range | 0.8 Vp-p |
Interface | Parallel LVDS |
Operating Temperature Range | -40 to 85 C |
Package Group | BGA |
Package Size: mm2:W x L | 292BGA: 729 mm2: 27 x 27(BGA) PKG |
Power Consumption(Typ) | 4400 mW |
Rating | Catalog |
Reference Mode | Int |
Resolution | 12 Bits |
SFDR | 68.1 dB |
SINAD | 57.7 dB |
SNR | 58.6 dB |
Sample Rate(Max) | 1800,3600 MSPS |
Plan ecológico
RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: ADC-WB-BB
ADC Wide Band Balun Board
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: TC1-DESIQ-SBB
TC1 DESIQ Single Balun Board
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: ADCRF2LA
The ADCRF2LA FMC to Logic Analyzer Adapter Board for the ADC12D1x00RFRB
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: ADC12D1800RFRB
12-Bit, Dual 1.8 GSPS or Single 3.6 GSPS A/D Converter Reference Board
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: ADC-LD-BB
ADC Low Distortion Balun Board
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- From Sample Instant to Data Output: Understanding Latency in the GSPS ADCPDF, 392 Kb, Archivo publicado: dic 18, 2012
For many applications which use ultra high-speed ADCs, latency can be a critical performance specification. For example, if the ADC is used in any kind of feedback loop, then the absolute latency is an important factor. For a MIMO system such as a phased array radar, the relative difference and variability in latency becomes important. This application note covers latency in the GSPS ADC products, - Maximizing SFDR Performance in the GSPS ADC: Spur Sources and Methods of MitigatPDF, 720 Kb, Archivo publicado: dic 9, 2013
The SFDR performance of an ADC is limited by the largest spur in the spectrum from DC to Fs / 2. These spurs can either be reduced or avoided entirely for maximum SFDR performance, based on the application. This reference design explores the reason behind spurs in the 10-bit and 12-bit GSPS ADCfamily. The specific products covered are: ADC12D1800RF, ADC12D1600RF, ADC12D1000RF, ADC12D800RF, ADC12 - AN-2128 ADC1xD1x00 Pin Compatibility (Rev. C)PDF, 60 Kb, Revisión: C, Archivo publicado: mayo 1, 2013
In order to facilitate upgrading applications from a 10-bit Gig ADC to a 12-bit Gig ADC, the ADC10D1x00(ADC10D1500/ADC10D1000) is designed to be pin-compatible with the ADC12D1x00(ADC12D1800/1600/1000). This means that a single board layout may be designed with both resolutionADCs in mind for more cost efficient and time-to-market product development. - Wide Bandwidth Receiver Implementation by Interleaving Two Giga-Sampling ADCsPDF, 621 Kb, Archivo publicado: dic 7, 2015
- AN-2177 Using the LMH6554 as a ADC Driver (Rev. A)PDF, 1.7 Mb, Revisión: A, Archivo publicado: abr 26, 2013
This application report discusses the use of the Texas Instruments LMH6554 as an ADC driver. - Synchronizing the Giga-Sample ADCs Interfaced with Multiple FPGAsPDF, 943 Kb, Archivo publicado: agosto 6, 2014
- AN-2132 Synchronizing Multiple GSPS ADCs in a System: The AutoSync Feature (Rev. G)PDF, 169 Kb, Revisión: G, Archivo publicado: feb 3, 2017
- Signal Chain Noise Figure AnalysisPDF, 615 Kb, Archivo publicado: oct 29, 2014
Linea modelo
Serie: ADC12D1800RF (2)
- ADC12D1800RFIUT ADC12D1800RFIUT/NOPB
Clasificación del fabricante
- Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > High Speed ADCs (>10MSPS)