Datasheet Texas Instruments LMP7721MAX/NOPB — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | LMP7721 |
| Numero de parte | LMP7721MAX/NOPB |
Amplificador de precisión de corriente de polarización de entrada de 3 femtoamperios 8-SOIC -40 a 125
Hojas de datos
LMP7721 3-Femtoampere Input Bias Current Precision Amplifier datasheet
PDF, 1.0 Mb, Revisión: E, Archivo publicado: dic 15, 2014
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 8 | 8 |
| Package Type | D | D |
| Industry STD Term | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 2500 | 2500 |
| Carrier | LARGE T&R | LARGE T&R |
| Device Marking | 21MA | LMP77 |
| Width (mm) | 3.91 | 3.91 |
| Length (mm) | 4.9 | 4.9 |
| Thickness (mm) | 1.58 | 1.58 |
| Pitch (mm) | 1.27 | 1.27 |
| Max Height (mm) | 1.75 | 1.75 |
| Mechanical Data | Descargar | Descargar |
Paramétricos
| Additional Features | N/A |
| Architecture | CMOS |
| CMRR(Min) | 84 dB |
| CMRR(Typ) | 100 dB |
| GBW(Typ) | 17 MHz |
| Input Bias Current(Max) | 0.02 pA |
| Iq per channel(Max) | 1.7 mA |
| Iq per channel(Typ) | 1.3 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 1.5 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 22 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 10.5 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 1.8 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 6.5 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.15 mV |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: LMP7721MAEVALMF/NOPB
LMP7721 Multi-Function Evaluation Board
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- AN-1798 Designing with Electro-Chemical Sensors (Rev. C)PDF, 62 Kb, Revisión: C, Archivo publicado: mayo 1, 2013
As early as 1950, electro-chemical sensors were used for oxygen (gas) monitoring; however, with increasing concerns about personal safety, the demand for portable electro-chemical sensors has dramatically increased. Today, electro-chemical sensors are commonly used in portable equipment todetect different toxic gases. - AN-1852 Designing With pH Electrodes (Rev. A)PDF, 115 Kb, Revisión: A, Archivo publicado: mayo 1, 2013
A pH electrode measures hydrogen ion (H+) activity and produces an electrical potential or voltage. Theoperation of the pH electrode is based on the principle that an electric potential develops when two liquidsof different pH come into contact at opposite sides of a thin glass membrane. This was originallydiscovered in 1906 by Max Cremer [1]. His discovery laid the foundation for Fritz Habe
Linea modelo
Serie: LMP7721 (2)
- LMP7721MA/NOPB LMP7721MAX/NOPB
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps