Datasheet Texas Instruments ADS5413IPHP — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | ADS5413 |
| Numero de parte | ADS5413IPHP |
Convertidor analógico a digital de ancho de banda de entrada (ADC) de 12 bits, 65 MSPS, 1.0 GHz 48-HTQFP -40 a 85
Hojas de datos
ADS5413: 12-bit, 65 MSPS CommsADC Analog-to-Digital Converter datasheet
PDF, 466 Kb, Archivo publicado: dic 16, 2003
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 48 |
| Package Type | PHP |
| Industry STD Term | HTQFP |
| JEDEC Code | S-PQFP-G |
| Package QTY | 250 |
| Carrier | JEDEC TRAY (10+1) |
| Device Marking | AZ5413 |
| Width (mm) | 7 |
| Length (mm) | 7 |
| Thickness (mm) | 1 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Descargar |
Paramétricos
| # Input Channels | 1 |
| Analog Input BW | 1000 MHz |
| Architecture | Pipeline |
| DNL(Max) | 0.5 +/-LSB |
| DNL(Typ) | 0.5 +/-LSB |
| ENOB | 11.3 Bits |
| INL(Max) | 1 +/-LSB |
| INL(Typ) | 1 +/-LSB |
| Input Buffer | No |
| Input Range | 2.25 Vp-p |
| Interface | Parallel LVDS |
| Operating Temperature Range | -40 to 85 C |
| Package Group | HTQFP |
| Package Size: mm2:W x L | 48HTQFP: 81 mm2: 9 x 9(HTQFP) PKG |
| Power Consumption(Typ) | 400 mW |
| Rating | Catalog |
| Reference Mode | Ext,Int |
| Resolution | 12 Bits |
| SFDR | 79 dB |
| SINAD | 67.8 dB |
| SNR | 68.5 dB |
| Sample Rate(Max) | 65 MSPS |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: TSW2200EVM
TSW2200 Low-Cost Portable Power Supply Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- How to Calculate the Period Jitter from the SSCR for High-Speed ADCsPDF, 218 Kb, Archivo publicado: dic 17, 2003
This document introduces a general formula to translate the phase noise of a clock source, rated via the Single Sideband to Carrier Ratio, to the cycle-to-cycle jitter of the oscillation period. The link allows to seamlessly aggregate the external clock source phase noise, usually given in dBc/Hz, to the phase stability figure of the on-chip clock synchronization circuitry, usually rated in ps-RMS - Standard Procedure Direct Measurement Sub-picosecond RMS Jitter High-Speed ADCPDF, 1.0 Mb, Archivo publicado: jun 30, 2004
- High-Speed Analog-to-Digital Converter BasicsPDF, 1.1 Mb, Archivo publicado: enero 11, 2012
The goal of this document is to introduce a wide range of theories and topics that are relevant tohigh-speed analog-to-digital converters (ADC). This document provides details on sampling theorydata-sheet specifications ADC selection criteria and evaluation methods clock jitter and other commonsystem-level concerns. In addition some end-users will want to extend the performance capabil - Why Use Oversampling when Undersampling Can Do the Job? (Rev. A)PDF, 1.2 Mb, Revisión: A, Archivo publicado: jul 19, 2013
- Design Considerations for Avoiding Timing Errors during High-Speed ADC, LVDS Dat (Rev. A)PDF, 2.0 Mb, Revisión: A, Archivo publicado: mayo 22, 2015
- Smart Selection of ADC/DAC Enables Better Design of Software-Defined RadioPDF, 376 Kb, Archivo publicado: abr 28, 2009
This application report explains different aspects of selecting analog-to-digital and digital-to-analog data converters for Software-Defined Radio (SDR) applications. It also explains how ADS61xx ADCs and the DAC5688 from Texas Instruments fit properly for SDR designs. - Driving High-Speed ADCs: Circuit Topologies and System-Level Parameters (Rev. A)PDF, 327 Kb, Revisión: A, Archivo publicado: sept 10, 2010
This application report discusses the performance-related aspects of passive and active interfaces at the analog input of high-speed pipeline analog-to-digital converters (ADCs). The report simplifies the many possibilities into two main categories: passive and active interface circuits. The first section of the report gives an overview of equivalent models of buffered and unbuffered ADC input cir - Phase Noise Performance and Jitter Cleaning Ability of CDCE72010PDF, 2.3 Mb, Archivo publicado: jun 2, 2008
This application report presents phase noise data taken on the CDCE72010 jitter cleaner and synchronizer PLL device. The phase noise performance of the CDCE72010 depends on the phase noise of the reference clock VCXO clock and the CDCE72010 itself. This application report shows the phase noise performance at several of the most popular CDMA frequencies. This data helps the user to choose the rig - CDCE72010 as a Clocking Solution for High-Speed Analog-to-Digital ConvertersPDF, 424 Kb, Archivo publicado: jun 8, 2008
Texas Instruments has recently introduced a family of devices suitable to meet the demands of high-speed high-IF sampling analog-to-digital converters (ADCs) such as the ADS5483 which is capable of sampling up to 135 MSPS. To realize the full potential of these high-performance devices the system must provide an extremely low phase noise clock source. The CDCE72010 clock synthesizer chip offers - Principles of Data Acquisition and Conversion (Rev. A)PDF, 132 Kb, Revisión: A, Archivo publicado: abr 16, 2015
- A Glossary of Analog-to-Digital Specifications and Performance Characteristics (Rev. B)PDF, 425 Kb, Revisión: B, Archivo publicado: oct 9, 2011
This glossary is a collection of the definitions of Texas Instruments' Delta-Sigma (О”ОЈ), successive approximation register (SAR), and pipeline analog-to-digital (A/D) converter specifications and performance characteristics. Although there is a considerable amount of detail in this document, the product data sheet for a particular product specification is the best and final reference. - Analog-to-Digital Converter Grounding Practices Affect System Performance (Rev. A)PDF, 69 Kb, Revisión: A, Archivo publicado: mayo 18, 2015
Linea modelo
Serie: ADS5413 (1)
- ADS5413IPHP
Clasificación del fabricante
- Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > High Speed ADCs (>10MSPS)