Datasheet Texas Instruments THS4304DR — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | THS4304 |
| Numero de parte | THS4304DR |
Amplificador operacional de banda ancha 8-SOIC -40 a 85
Hojas de datos
THS4304: Wideband Operational Amplifier datasheet
PDF, 1.5 Mb, Revisión: A, Archivo publicado: jul 30, 2004
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Obsoleto (El fabricante ha interrumpido la producción del dispositivo) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 8 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Width (mm) | 3.91 |
| Length (mm) | 4.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Descargar |
Paramétricos
| 2nd Harmonic(dBc) | 84 |
| 3rd Harmonic(dBc) | 100 |
| @ MHz | 10 |
| Acl, min spec gain(V/V) | 1 |
| Additional Features | N/A |
| Approx. Price (US$) | 2.41 | 1ku |
| Architecture | Bipolar Voltage FB |
| BW @ Acl(MHz) | 3000 |
| CMRR(Min)(dB) | 80 |
| CMRR(Typ)(dB) | 95 |
| GBW(Typ)(MHz) | 3000 |
| Input Bias Current(Max)(pA) | 12000000 |
| Iq per channel(Max)(mA) | 18.9 |
| Iq per channel(Typ)(mA) | 18 |
| Number of Channels(#) | 1 |
| Offset Drift(Typ)(uV/C) | 5 |
| Operating Temperature Range(C) | -40 to 85 |
| Output Current(Typ)(mA) | 100 |
| Package Group | SOIC |
| Package Size: mm2:W x L (PKG) | 8SOIC: 29 mm2: 6 x 4.9(SOIC) |
| Rail-to-Rail | In Out |
| Rating | Catalog |
| Slew Rate(Typ)(V/us) | 790 |
| Total Supply Voltage(Max)(+5V=5, +/-5V=10) | 5 |
| Total Supply Voltage(Min)(+5V=5, +/-5V=10) | 2.7 |
| Vn at Flatband(Typ)(nV/rtHz) | 2.4 |
| Vos (Offset Voltage @ 25C)(Max)(mV) | 4 |
Plan ecológico
| RoHS | Desobediente |
| Pb gratis | No |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: THS4304DGKEVM
THS4304 Evaluation Module for DGK Package
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: THS4304DBVEVM
THS4304 Evaluation Module for DBV Package
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- RF and IF amplifiers with op ampsPDF, 177 Kb, Archivo publicado: feb 28, 2005
- Wideband Complementary Current Output DAC Single-Ended InterfacePDF, 597 Kb, Archivo publicado: jun 21, 2005
High-speed digital-to-analog converters (DACs) most often use a transformer-coupled output stage. In applications where this configuration is not practical, a single op ampdifferential to single-ended stage has often been used. This application note steps through the exact design equations required to achieve gain matching from each output as well as a matched input impedance to each of the DA - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Linea modelo
Serie: THS4304 (9)
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)