Datasheet Texas Instruments TPS61103PWG4 — Ficha de datos

Fabricante	Texas Instruments
Serie	TPS61103
Numero de parte	TPS61103PWG4

Hojas de datos

Precios

Estado

Embalaje

Plan ecológico

Kits de diseño y Módulos de evaluación

• Evaluation Modules & Boards: TPS61100EVM-216
  TPS61100 Evaluation Module
  Estado del ciclo de vida: Obsoleto (El fabricante ha interrumpido la producción del dispositivo)
  
  • Descargar
• Evaluation Modules & Boards: TPS61107EVM-216
  TPS61107 Evaluation Module
  Estado del ciclo de vida: Obsoleto (El fabricante ha interrumpido la producción del dispositivo)
  
  • Descargar
• Evaluation Modules & Boards: TPS61103EVM-216
  TPS61103 Evaluation Module
  Estado del ciclo de vida: Obsoleto (El fabricante ha interrumpido la producción del dispositivo)
  
  • Descargar
• Evaluation Modules & Boards: TPS61106EVM-216
  TPS61106 Evaluation Module
  Estado del ciclo de vida: Obsoleto (El fabricante ha interrumpido la producción del dispositivo)
  
  • Descargar

Notas de aplicación

• Descargar
  Minimizing Ringing at the Switch Node of a Boost Converter
  PDF, 201 Kb, Archivo publicado: sept 15, 2006
  The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter.
• Descargar
  Basic Calculation of a Boost Converter's Power Stage (Rev. C)
  PDF, 186 Kb, Revisión: C, Archivo publicado: enero 8, 2014
  This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed.
• Descargar
  Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)
  PDF, 1.1 Mb, Revisión: A, Archivo publicado: mayo 11, 2015
• Descargar
  Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
  PDF, 387 Kb, Revisión: B, Archivo publicado: jun 15, 2017
• Descargar
  Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs
  PDF, 130 Kb, Archivo publicado: sept 19, 2011
• Descargar
  QFN and SON PCB Attachment (Rev. B)
  PDF, 821 Kb, Revisión: B, Archivo publicado: agosto 24, 2018
• Descargar
  IQ: What it is what it isn’t and how to use it
  PDF, 198 Kb, Archivo publicado: jun 17, 2011
• Descargar
  Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
  PDF, 418 Kb, Revisión: A, Archivo publicado: dic 11, 2018
  When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
• Descargar
  LDO PSRR Measurement Simplified (Rev. A)
  PDF, 131 Kb, Revisión: A, Archivo publicado: agosto 9, 2017
  This applicationreportexplainsdifferentmethodsof measuringthe PowerSupplyRejectionRatio(PSRR)of a Low-Dropout(LDO)regulatorand includesthe prosand consof thesemeasuringmethods
• Descargar
  LDO Noise Demystified (Rev. A)
  PDF, 785 Kb, Revisión: A, Archivo publicado: agosto 9, 2017
  Thisapplicationreportexplainsthe differencebetweennoiseand PSRRof an LDO.It also explainsthedifferentwaysnoiseis specifiedin LDOdatasheetsandwhichspecificationshouldbe usedin theapplication.Finallyit explainshow LDOnoiseis reduced.

Linea modelo

Clasificación del fabricante

• Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Converter (Integrated Switch)