Datasheet Texas Instruments UC2577TD-ADJ — Ficha de datos

FabricanteTexas Instruments
SerieUC2577-ADJ
Numero de parteUC2577TD-ADJ
Datasheet Texas Instruments UC2577TD-ADJ

Regulador elevador de voltaje simple 5-DDPAK / TO-263 -40 a 125

Hojas de datos

UC2577-ADJ: Simple Step-Up Voltage Regulators datasheet
PDF, 366 Kb, Revisión: A, Archivo publicado: mayo 16, 2003
Extracto del documento

Precios

Estado

Estado del ciclo de vidaObsoleto (El fabricante ha interrumpido la producción del dispositivo)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin5
Package TypeKTT
Industry STD TermTO-263
JEDEC CodeR-PSFM-G
Width (mm)8.42
Length (mm)10.16
Thickness (mm)4.58
Pitch (mm)1.7
Max Height (mm)4.83
Mechanical DataDescargar

Reemplazos

ReplacementUC2577TDKTTT-ADJ
Replacement CodeS

Paramétricos

Approx. Price (US$)10.19 | 1ku
Duty Cycle(Max)(%)100
Iq(Typ)(mA)45
Operating Temperature Range(C)-40 to 125
Package GroupDDPAK/TO-263
RatingCatalog
Regulated Outputs(#)1
Switch Current Limit(Min)(A)3
Switch Current Limit(Typ)(A)4.3
Switching Frequency(Max)(kHz)52
Switching Frequency(Min)(kHz)52
TypeConverter
Vin(Max)(V)40
Vin(Min)(V)3
Vout(Max)(V)60
Vout(Min)(V)5

Plan ecológico

RoHSDesobediente
Pb gratisNo

Notas de aplicación

  • Basic Calculation of a Boost Converter's Power Stage (Rev. C)
    PDF, 186 Kb, Revisión: C, Archivo publicado: enero 8, 2014
    This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed.
  • DN-49 UC2577 Controls SEPIC Converter for Automotive Applications
    PDF, 61 Kb, Archivo publicado: sept 5, 1999
    The Single-Ended Primary Inductance Converter (SEPIC) can convert an input voltage to an output voltage that is higher, lower, or equal to the input. Conversion is performed without the use of expensive transformers, making the SEPIC a good choice for low-cost, non-isolated applications. The UC2577 provides the switch and control to take advantage of this topology with a minimum of additional part

Linea modelo

Serie: UC2577-ADJ (4)

Clasificación del fabricante

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Converter (Integrated Switch)

Otros nombres:

UC2577TDADJ, UC2577TD ADJ