Datasheet Texas Instruments TLV2541IDGK — Ficha de datos

FabricanteTexas Instruments
SerieTLV2541
Numero de parteTLV2541IDGK
Datasheet Texas Instruments TLV2541IDGK

12 bits, 200 kSPS ADC, salida en serie, compatible con TMS320 (hasta 10MHz), canal único. 8-VSSOP -40 a 85

Hojas de datos

2.7 V to 5.5 V Low-Power 12-Bit 140/200 KSPS, Serial Analog-To-Digital Converter datasheet
PDF, 1.2 Mb, Revisión: E, Archivo publicado: abr 12, 2010

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin8
Package TypeDGK
Industry STD TermVSSOP
JEDEC CodeR-PDSO-G
Package QTY80
CarrierTUBE
Device MarkingAHA
Width (mm)3
Length (mm)3
Thickness (mm).97
Pitch (mm).65
Max Height (mm)1.07
Mechanical DataDescargar

Paramétricos

# Input Channels1
Analog Voltage AVDD(Max)5.5 V
Analog Voltage AVDD(Min)2.7 V
ArchitectureSAR
Digital Supply(Max)5.5 V
Digital Supply(Min)2.7 V
INL(Max)1 +/-LSB
Input Range(Max)5.5 V
Input TypeSingle-Ended
Integrated FeaturesOscillator
InterfaceSPI
Multi-Channel ConfigurationN/A
Operating Temperature Range-40 to 85,0 to 70 C
Package GroupVSSOP
Package Size: mm2:W x L8VSSOP: 15 mm2: 4.9 x 3(VSSOP) PKG
Power Consumption(Typ)2.8 mW
RatingCatalog
Reference ModeExt
Resolution12 Bits
SINAD72 dB
SNR72 dB
Sample Rate (max)200kSPS SPS
Sample Rate(Max)0.2 MSPS
THD(Typ)-84 dB

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: 5-6KINTERFACE
    5-6K Interface Evaluation Module
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • Interfacing the TMS320C5402 DSP to the TLV2541 ADC and the TLV5636 DAC (Rev. A)
    PDF, 240 Kb, Revisión: A, Archivo publicado: sept 19, 2001
    This report shows how to interface TLV2541 and TLV5636 12-bit serial data converters to the TMS320C5402 DSP via the McBSP. It presents a hardware solution and a software solution to interface the 16-bit fixed-point TMS320C5402 DSP to read from the TLV2541 12-bit, 200-KSPS, single-channel, serial analog-to-digital converter (ADC) and to write to the TLV5636 12-bit digital-to-analog converter (D
  • Interfacing the TLV2541 to the MSP430F149
    PDF, 169 Kb, Archivo publicado: marzo 7, 2003
    This application report discusses the SPI interfacing implementation of a system featuring the following devices: TLV2541, TLC2551, TLC3541 and TLC4541. These ADCs offer a variety of options for users ranging from extremely low power and wide voltage supply rangeto fast conversion throughput. All devices share a very small (MSOP) footprint and are pin-for-pin compatible for easy upgradeability.
  • Interfacing Low Power Serial (SPI) ADCs to the MSP430F449
    PDF, 407 Kb, Archivo publicado: feb 4, 2005
    This application report discusses the serial peripheral interface (SPI) implementation of a data acquisition system featuring the following devices: TLV2541, TLC2551, TLC3541, and TLC4541. These analog-to-digital converters (ADC) offer options for users ranging from extremely low power and wide voltage supply range to fast conversion throughput. All devices share a small (MSOP) footprint and are p
  • Interfacing the TLV2541 ADC and the TLV5618A DAC to the TMS320C31 DSP
    PDF, 352 Kb, Archivo publicado: nov 13, 2000
    This application report is written to help design engineers or technicians implement a simple data acquisition system using serial analog-to-digital converters (ADCs) and digital-to-analog (DACs) from Texas Instruments. A hardware and software solution for interfacing the TLV2541 ADC and the TLV5618A DAC to the TMS320C31 DSP with the use of the TMS320C3x DSP starter kit (DSK) is presented here.
  • Determining Minimum Acquisition Times for SAR ADCs, part 1 (Rev. A)
    PDF, 227 Kb, Revisión: A, Archivo publicado: nov 10, 2010
    This application report analyzes a simple method for calculating minimum acquisition times for successive-approximation register analog-to-digital converters (SAR ADCs). The input structure of the ADC is examined along with the driving circuit. The voltage on the sampling capacitor is then determined for the case when a step function is applied to the input of the driving circuit. Three different
  • Determining Minimum Acquisition Times for SAR ADCs, part 2
    PDF, 215 Kb, Archivo publicado: marzo 17, 2011
    The input structure circuit of a successive-approximation register analog-to-digital converter (SAR ADC) incombination with the driving circuit forms a transfer function that can be used to determine minimum acquisition times for different types of applied input signals. This application report, which builds on Determining Minimum Acquisition Times for SAR ADCs When a Step Function is Applied to

Linea modelo

Clasificación del fabricante

  • Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > Precision ADCs (<=10MSPS)