Datasheet Texas Instruments TPS61089RNRR — Ficha de datos

FabricanteTexas Instruments
SerieTPS61089
Numero de parteTPS61089RNRR
Datasheet Texas Instruments TPS61089RNRR

Convertidores de refuerzo síncrono totalmente integrados de 12,6 V y 7 A en paquete VQFN de 2,0 mm x 2,5 mm 11-VQFN-HR -40 a 85

Hojas de datos

TPS61089x 12.6-V, 7-A Fully-Integrated Synchronous Boost Converters in 2.0-mm x 2.5-mm VQFN Package datasheet
PDF, 1.4 Mb, Revisión: B, Archivo publicado: jul 27, 2016
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante

Embalaje

Pin11
Package TypeRNR
Industry STD TermVQFN-HR
JEDEC CodeR-PQFP-N
Package QTY3000
CarrierLARGE T&R
Device MarkingZGOI
Width (mm)2
Length (mm)2.5
Thickness (mm).9
Pitch (mm).5
Max Height (mm)1
Mechanical DataDescargar

Paramétricos

Duty Cycle(Max)90 %
Iq(Typ)0.01 mA
Operating Temperature Range-40 to 85 C
Package GroupVQFN-HR
RatingCatalog
Regulated Outputs1
Special FeaturesAdjustable Current Limit,Enable,Light Load Efficiency,Synchronous Rectification
Switch Current Limit(Min)10.6 A
Switch Current Limit(Typ)11.4 A
Switching Frequency(Max)2200 kHz
Switching Frequency(Min)200 kHz
TypeConverter
Vin(Max)12 V
Vin(Min)2.7 V
Vout(Max)12.6 V
Vout(Min)4.5 V

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: TPS61089EVM-742
    Boost Converter Evaluation Module for TPS61089
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • Reducing Radiated EMI in TPS61088 Boost Converter
    PDF, 1.4 Mb, Archivo publicado: jul 22, 2016
  • Output Short-Circuit Protection Solution for the TPS61088
    PDF, 409 Kb, Archivo publicado: sept 22, 2016
  • Five Steps to a Good PCB Layout of the Boost Converter
    PDF, 701 Kb, Archivo publicado: mayo 3, 2016
  • AN-2020 Thermal Design By Insight, Not Hindsight (Rev. C)
    PDF, 568 Kb, Revisión: C, Archivo publicado: abr 23, 2013
    This application report provides an in-depth discussion of thermal design.
  • Minimizing Ringing at the Switch Node of a Boost Converter
    PDF, 201 Kb, Archivo publicado: sept 15, 2006
    The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter.
  • Design considerations for a resistive feedback divider in a DC/DC converter
    PDF, 393 Kb, Archivo publicado: abr 26, 2012
  • Basic Calculation of a Boost Converter's Power Stage (Rev. C)
    PDF, 186 Kb, Revisión: C, Archivo publicado: enero 8, 2014
    This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed.
  • PowerPAD Thermally Enhanced Package (Rev. H)
    PDF, 983 Kb, Revisión: H, Archivo publicado: jul 6, 2018
  • QFN and SON PCB Attachment (Rev. B)
    PDF, 821 Kb, Revisión: B, Archivo publicado: agosto 24, 2018
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, Archivo publicado: jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, Revisión: A, Archivo publicado: dic 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Linea modelo

Serie: TPS61089 (2)

Clasificación del fabricante

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Converter (Integrated Switch)