Datasheet Texas Instruments TPS61165DBVR — Ficha de datos

Fabricante	Texas Instruments
Serie	TPS61165
Numero de parte	TPS61165DBVR

Hojas de datos

Precios

Estado

Embalaje

Paramétricos

Plan ecológico

Kits de diseño y Módulos de evaluación

• Evaluation Modules & Boards: TPS61165EVM-283
  TPS61165EVM-283 Evaluation Module
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar

Notas de aplicación

• Descargar
  Compensating and measuring the DC/DC converter loop that powers a high-power LED
  PDF, 618 Kb, Archivo publicado: oct 22, 2008
• Descargar
  Simple Backlight Driver Dimming Performance
  PDF, 74 Kb, Archivo publicado: marzo 20, 2017
  The TPS61158, TPS61160/61, TPS61162/63A, TPS61165, and TPS61169 (hereafter TPS611xx) are simple backlight drivers commonly used in smartphones and tablets. These devices support PWM dimming with an input voltage as low as 2.7 V. This application note discusses the requirements for using tje TPS611xx parts at the lowest performance specifications for PWM dimming.
• Descargar
  How to Use Analog Dimming With TPS6116x
  PDF, 162 Kb, Archivo publicado: agosto 5, 2011
  The TPS6116x family of devices are simple, white LED drivers that can drive up to 10 LEDs in series. The CTRL pin on these devices is the input for the integrated analog dimming circuitry but can only be used for PWM signals switching higher than 5 kHz. This application report shows a simple, external circuit that can be used to perform analog dimming from PWM signals that are below 5 kHz as well
• Descargar
  TPS6116x With Separate Power Stage and IC Input Voltages
  PDF, 194 Kb, Archivo publicado: abr 2, 2009
  This application report shows how to operate the TPS6116x integrated circuits (IC) with two separate input power rails, one for the boost power stage and one to power the IC itself. In this example, an input as low as 1.8 V from discharged dual-alkaline batteries supplies power to the boost stage, whereas a separate 3.3-V supply powers the IC.
• Descargar
  Extending the Input Voltage Range of the TPS6116x/8x/9x WLED Drivers
  PDF, 124 Kb, Archivo publicado: agosto 12, 2009
  The TPS6116x, TPS6118x and TPS6119x WLED driver and TPS6117x boost converter integrated circuits (IC) can operate with different input voltages, one powering the IC itself and the other powering the boost power stage. This application report explains various options on how to use the WLED drivers with split power rails. This allows these LED drivers to be used in applications where the available
• Descargar
  Analog PWM Dimming in White-LED Drivers
  PDF, 539 Kb, Archivo publicado: dic 21, 2016
  Pulse-width modulation (PWM) is a common type of dimming used to adjust the current in white-LEDdriver devices. PWM dimming takes a rectangle waveform with variable positive duty cycle (D) and adjuststhe LED current proportionally. For many smaller format white LED drivers (7-inch screen size or smaller),the PWM signal is converted to a DC control voltage and made to drive the LED current in
• Descargar
  Designing Low Cost Flyback Power Supply Using Boost Converter (TPS61165) for HF
  PDF, 4.2 Mb, Archivo publicado: abr 17, 2014
  TPS61165, LMR14206, TPS5401, AMC1100, TLV1117I-33, TLV1117I-50 Designing low cost flyback supply using boost converter for HF Inverter
• Descargar
  Q4 2008 Issue Analog Applications Journal
  PDF, 1.5 Mb, Archivo publicado: oct 22, 2008
• Descargar
  Schottky Diode Selection in Asynchronous Boost Converters
  PDF, 491 Kb, Archivo publicado: sept 6, 2016
  Asynchronous boost converters require a Schottky diode as the rectifying element due to the diode's lowforward voltage and fast turn-on time. Because of these characteristics asynchronous boost converterscan have as good as, or better efficiency, than synchronous boost converters. This is especially true whenthe boost conversion ratios (VOUT/VIN) are high, and the Schottky diode conduction t
• Descargar
  Inductor Selection in Boost Converters for LCD Backlight Applications
  PDF, 764 Kb, Archivo publicado: oct 24, 2016
  White LED drivers for LCD back-light applications are often designed for battery-powered devices. This makes circuit size and efficiency crucial. Because of this, selecting the optimal inductor is one of the mostimportant aspects of the design. This application note discusses the important parameters of the inductorand how to select the right inductor for the application.
• Descargar
  Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)
  PDF, 1.1 Mb, Revisión: A, Archivo publicado: mayo 11, 2015
• Descargar
  Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
  PDF, 387 Kb, Revisión: B, Archivo publicado: jun 15, 2017
• Descargar
  Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
  PDF, 418 Kb, Revisión: A, Archivo publicado: dic 11, 2018
  When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Linea modelo

Clasificación del fabricante

• Semiconductors > Power Management > LED Driver > Backlight LED Driver