Datasheet Texas Instruments TAS5701PAPRG4 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | TAS5701 |
| Numero de parte | TAS5701PAPRG4 |
Amplificador de potencia de audio estéreo I2S de 20 W (controlado por H / W) 64-HTQFP 0 a 85
Hojas de datos
20-W Stereo Digital Audio Power Amplifier, TAS5701 datasheet
PDF, 1.0 Mb, Revisión: A, Archivo publicado: jul 19, 2010
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 64 |
| Package Type | PAP |
| Industry STD Term | HTQFP |
| JEDEC Code | S-PQFP-G |
| Package QTY | 1000 |
| Carrier | LARGE T&R |
| Device Marking | TAS5701 |
| Width (mm) | 10 |
| Length (mm) | 10 |
| Thickness (mm) | 1 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Descargar |
Paramétricos
| Analog Supply (V) | 3 Max |
| Audio Input Type | Digital |
| Closed/Open Loop | Open |
| Control Interface | Hardware |
| Operating Temperature Range | 0 to 85 C |
| Package Group | HTQFP |
| Package Size: mm2:W x L | 64HTQFP: 144 mm2: 12 x 12(HTQFP) PKG |
| Power Stage Supply(Max) | 21 V |
| Power Stage Supply(Min) | 10 V |
| Power to Bridge Tied Load(Max) | 35 W |
| Power to Parallel Bridge Tied Load(Max) | 53 W |
| Rating | Catalog |
| Sampling Rate(Max) | 192 kHz |
| Sampling Rate(Min) | 32 kHz |
| Speaker Channels | 2 Max |
| Supported Bridge Tied Load(Min) | 6 Ohms |
Plan ecológico
| RoHS | Obediente |
Notas de aplicación
- TAS57xx Dynamic Range ControlPDF, 324 Kb, Archivo publicado: jun 18, 2010
This application report provides background information, general equations, and instructions for proper use of the Texas Instruments TAS57xx series Dynamic Range Control (DRC). Topics include I2C configuration, single-band and dual-band DRC, coefficient computation, device offerings, and user interface configuration. - AN-1737 Managing EMI in Class D Audio Applications (Rev. A)PDF, 140 Kb, Revisión: A, Archivo publicado: mayo 1, 2013
Electromagnetic interference (EMI) is an unwanted disturbance caused in an electrical circuit byelectromagnetic radiation emitted from an external source. The disturbance may interrupt, obstruct, orotherwise degrade the effective performance of the circuit. - Using Thermal Calculation Tools for Analog ComponentsPDF, 1.1 Mb, Archivo publicado: sept 2, 2010
This document provides general guidance on the use of toolsand calculations for thermal estimates of component operating temperatures for analog devices. Of particularfocus are components with direct thermal paths to the PCB which is common for components which need a low thermal resistance to manage the dissipated power. This document provides practical considerations for estimation of o - AN-1849 An Audio Amplifier Power Supply Design (Rev. B)PDF, 1.9 Mb, Revisión: B, Archivo publicado: mayo 1, 2013
This application report provides design information for a power supply for use with our newest offering of high-performance, ultra high-fidelity audio amplifier input stage ICs. - Guidelines for Measuring Audio Power Amplifier PerformancePDF, 765 Kb, Archivo publicado: oct 30, 2001
This application note provides guidelines for measuring the date sheet parameters of Texas Instruments audio power amplifiers (APAs) using prefabricated evaluation modules (EVMs). The primary equipment used for the measurements consists of the System Two audio measurement system by Audio Precision , a digital multimeter (DMM), and a dc power supply.
Linea modelo
Serie: TAS5701 (4)
- TAS5701PAP TAS5701PAP-P TAS5701PAPR TAS5701PAPRG4
Clasificación del fabricante
- Semiconductors > Audio > Mid-Power Audio Amplifiers (10-50W) > Digital I2S Input Class-D