Hojas de datos
Más
Only-Datasheet.com
Sobre nosotros Cooperación Publicidad Contactos
en - English ru - Русский de - Deutsch zh - 中文
Rlocman.es - Hojas de datos
Hojas de datosAmplificadores operacionalesTexas InstrumentsTHS6042
THS6042CDDA

Datasheet Texas Instruments THS6042CDDA — Ficha de datos

FabricanteTexas Instruments
SerieTHS6042
Numero de parteTHS6042CDDA
Datasheet Texas Instruments THS6042CDDA

350-mA, +/- 12V ADSL CPE Line Driver 8-SO PowerPAD 0 a 70

Hojas de datos

Descargar
350 mA +/-12V ADSL CPE Line Drivers datasheet
PDF, 1.6 Mb, Revisión: G, Archivo publicado: dic 11, 2001
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin8
Package TypeDDA
Industry STD TermHSOIC
JEDEC CodeR-PDSO-G
Package QTY75
CarrierTUBE
Device Marking6042C
Width (mm)3.9
Length (mm)4.89
Thickness (mm)1.48
Pitch (mm)1.27
Max Height (mm)1.7
Mechanical DataDescargar

Paramétricos

2nd Harmonic67 dBc
3rd Harmonic96 dBc
@ MHz1
Acl, min spec gain1 V/V
Additional FeaturesN/A
ArchitectureCurrent FB
BW @ Acl120 MHz
CMRR(Min)59 dB
CMRR(Typ)68 dB
GBW(Typ)120 MHz
Input Bias Current(Max)10000000 pA
Iq per channel(Max)10.5 mA
Iq per channel(Typ)8.2 mA
Number of Channels2
Offset Drift(Typ)20 uV/C
Operating Temperature Range-40 to 85,0 to 70 C
Output Current(Typ)350 mA
Package GroupSO PowerPAD
Package Size: mm2:W x L8SO PowerPAD: 29 mm2: 6 x 4.9(SO PowerPAD) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)1400 V/us
Total Supply Voltage(Max)33 +5V=5, +/-5V=10
Total Supply Voltage(Min)9 +5V=5, +/-5V=10
Vn at 1kHz(Typ)2.4 nV/rtHz
Vn at Flatband(Typ)2.2 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)16 mV

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: THS6042EVM
    THS6042 Evaluation Module
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • Descargar
    Active Output Impedance for ADSL Line Drivers
    PDF, 636 Kb, Archivo publicado: nov 26, 2002
    Signal termination is very common in bidirectional communication systems. Termination allows for receiving signals while transmitting different signals at the same time. With the increasing popularity of asymmetrical digital subscriber lines (ADSL), the requirement for a low power line driver amplifier combined with line termination becomes a very difficult goal. This application note examines the
  • Descargar
    Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Linea modelo

Serie: THS6042 (5)

Clasificación del fabricante

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)