Datasheet Texas Instruments LP2981A-50DBVR — Ficha de datos

FabricanteTexas Instruments
SerieLP2981A
Numero de parteLP2981A-50DBVR
Datasheet Texas Instruments LP2981A-50DBVR

Regulador de caída ultra baja de 100 mA con apagado, 0.75% de tolerancia 5-SOT-23 -40 a 125

Hojas de datos

LP2981 100-mA Ultra-Low Dropout Regulators With Shutdown datasheet
PDF, 1.1 Mb, Revisión: G, Archivo publicado: agosto 31, 2016
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante

Embalaje

Pin55
Package TypeDBVDBV
Industry STD TermSOT-23SOT-23
JEDEC CodeR-PDSO-GR-PDSO-G
Package QTY30003000
CarrierLARGE T&RLARGE T&R
Device MarkingLPELLPEG
Width (mm)1.61.6
Length (mm)2.92.9
Thickness (mm)1.21.2
Pitch (mm).95.95
Max Height (mm)1.451.45
Mechanical DataDescargarDescargar

Paramétricos

Accuracy2 %
Fixed Output Options2.8,2.9,3,3.3,5 V
Iout(Max)0.1 A
Iq(Typ)0.065 mA
Noise160 uVrms
Operating Temperature Range-40 to 125 C
Output Capacitor TypeNon-Ceramic
Output OptionsFixed Output
Package GroupSOT-23
Package Size: mm2:W x L5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG
RatingCatalog
Regulated Outputs1
Special FeaturesEnable
Thermal Resistance ОёJA205 В°C/W
Vdo(Typ)200 mV
Vin(Max)16 V
Vin(Min)2.2 V
Vout(Max)5 V
Vout(Min)2.8 V

Plan ecológico

RoHSObediente

Notas de aplicación

  • Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A)
    PDF, 509 Kb, Revisión: A, Archivo publicado: jun 4, 2008
  • 3.6V - 5.5V Input LDO Reference Design for MSP430 (Rev. A)
    PDF, 110 Kb, Revisión: A, Archivo publicado: jun 14, 2010
    This reference design is presented to help application designers and others who are trying to use the MSP430 in a system with an input voltage in the range of 3.6 V to 5.5 V and who are also interested in using an easy-to-use low-dropout linear regulator (LDO) for a simple design but may not be as concerned about maintaining the highest possible efficiency or longest battery life.
  • Low Power 150-mA LDO Linear Regulators. Extended Output Voltage Adjustment Range
    PDF, 41 Kb, Archivo publicado: jun 11, 1999
    The TPS76301 low-dropout (LDO) adjustable linear regulator generates a regulated 1-V output from an input voltage ranging from 3 V to 6 V. The application circuit is based on the application detailed in the TPS76301 data sheet (TI Literature number SLVS181A Figure 21) except for the auxiliary circuit which is shown here in Figure 1.
  • LDO Noise Demystified (Rev. A)
    PDF, 785 Kb, Revisión: A, Archivo publicado: agosto 9, 2017
    Thisapplicationreportexplainsthe differencebetweennoiseand PSRRof an LDO.It also explainsthedifferentwaysnoiseis specifiedin LDOdatasheetsandwhichspecificationshouldbe usedin theapplication.Finallyit explainshow LDOnoiseis reduced.
  • ESR Stability and the LDO Regulator
    PDF, 83 Kb, Archivo publicado: mayo 7, 2002
    Choosing an output capacitor for LDO regulators with PNP or PMOS pass element can be difficult to specific ESR requirements. This application note explains why higher ESR capacitors are necessary how to chose them and how to determine whether or not the regulator is stable.
  • Extending the Input Voltage Range of an LDO Regulator
    PDF, 32 Kb, Archivo publicado: agosto 16, 2002
    This application report explains how to use a FET to overcome the input voltage limitation of a linear regulator.
  • 3.6V - 5.5V Input LDO with Dual-Level Output Reference Design for MSP430 (Rev. A)
    PDF, 199 Kb, Revisión: A, Archivo publicado: jun 14, 2010
    This reference design is presented to help application designers and others who are trying to use the MSP430 in a system with an input voltage in the range of 3.6 V to 5.5 V and who are also interested in using an easy-to-use low-dropout linear regulator (LDO) for a simple design with extended battery life by putting the MSP430 into a low-power state between operating states.
  • Understanding the Terms and Definitions of LDO Voltage Regulators
    PDF, 197 Kb, Archivo publicado: oct 21, 1999
    This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab
  • Simple Power Solution Using LDOs for the DM365 (Rev. A)
    PDF, 104 Kb, Revisión: A, Archivo publicado: sept 11, 2009
  • Ceramic Capacitors Replace Tantalum Capacitors in LDOs (Rev. A)
    PDF, 44 Kb, Revisión: A, Archivo publicado: oct 13, 2006
    With the proper considerations ceramic output capacitors can be used with low dropout regulators (LDO) and DC/DC switching converters that require tantulum output capacitors.
  • Understanding LDO Dropout
    PDF, 52 Kb, Archivo publicado: mayo 9, 2005
    Not all low dropout (LDO) linear regulator data sheets provide the voltage dropout information needed for all applications. This application report shows a designer how to use an LDO data sheet's specified dropout performance to determine the dropout voltage at other operating conditions.
  • Technical Review of Low Dropout Voltage Regulator Operation And Performance
    PDF, 284 Kb, Archivo publicado: agosto 30, 1999
    This application report provides a technical review of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current and topologies. The report also includes detailed discussions of load/line regulation efficiency frequency response range of stable ESR and accuracy of LDO voltage regulators.
  • LDO PSRR Measurement Simplified (Rev. A)
    PDF, 131 Kb, Revisión: A, Archivo publicado: agosto 9, 2017
    This applicationreportexplainsdifferentmethodsof measuringthe PowerSupplyRejectionRatio(PSRR)of a Low-Dropout(LDO)regulatorand includesthe prosand consof thesemeasuringmethods
  • AN-1815 LDOs Ease the Stress of Start-Up (Rev. A)
    PDF, 81 Kb, Revisión: A, Archivo publicado: abr 24, 2013
    The LP38851/52/53 devices with soft-start provide a reliable way to ensure that start-up into highcapacitive loads is uneventful and stress free.
  • Packaging Limits Range of Linear Regulators
    PDF, 75 Kb, Archivo publicado: mayo 8, 2010
    The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.

Linea modelo

Clasificación del fabricante

  • Semiconductors > Power Management > Linear Regulator (LDO) > Single Channel LDO

Otros nombres:

LP2981A50DBVR, LP2981A 50DBVR