Datasheet Texas Instruments LM318M — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | LM318-N |
| Numero de parte | LM318M |
Amplificador operacional 8-SOIC 0 a 70
Hojas de datos
LM118/LM218/LM318 Operational Amplifiers datasheet
PDF, 1.6 Mb, Revisión: C, Archivo publicado: marzo 20, 2013
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | NRND (No recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 8 | 8 |
| Package Type | D | D |
| Industry STD Term | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 95 | 95 |
| Carrier | TUBE | TUBE |
| Device Marking | 318M | LM |
| Width (mm) | 3.91 | 3.91 |
| Length (mm) | 4.9 | 4.9 |
| Thickness (mm) | 1.58 | 1.58 |
| Pitch (mm) | 1.27 | 1.27 |
| Max Height (mm) | 1.75 | 1.75 |
| Mechanical Data | Descargar | Descargar |
Reemplazos
| Replacement | LM318M/NOPB |
| Replacement Code | S |
Paramétricos
| Additional Features | N/A |
| Architecture | Bipolar |
| CMRR(Min) | 70 dB |
| CMRR(Typ) | 100 dB |
| GBW(Typ) | 15 MHz |
| Input Bias Current(Max) | 500000 pA |
| Iq per channel(Max) | 10 mA |
| Iq per channel(Typ) | 4.5 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 6 uV/C |
| Operating Temperature Range | 0 to 70 C |
| Output Current(Typ) | 20 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 70 V/us |
| Total Supply Voltage(Max) | 40 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 10 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 15 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 10 mV |
Plan ecológico
| RoHS | See ti.com |
Notas de aplicación
- Instrumentational Amplifiers (See also LMP8358)PDF, 76 Kb, Archivo publicado: oct 2, 2002
- AN-446 A 150W IC Op Amp Simplifies Design of Power CircuitsPDF, 782 Kb, Archivo publicado: mayo 10, 2004
Application Note 446 A 150W IC Op Amp Simplifies Design of Power Circuits - Building an Op Amp With Bipolar Transistors, A Historical Application Note (Rev. A)PDF, 1.2 Mb, Revisión: A, Archivo publicado: sept 19, 2016
It is well known that the voltage noise of an operational amplifier can be decreased by increasing the emitter currentof the input stage. The signal-to-noise ratio will be improved by the increase of bias, until the base current noise begins to dominate. - Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)PDF, 81.7 Mb, Revisión: B, Archivo publicado: abr 22, 2013
This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.
Linea modelo
Serie: LM318-N (4)
- LM318M LM318M/NOPB LM318MX/NOPB LM318N/NOPB
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps