Datasheet Texas Instruments BUF634PG4 — Ficha de datos
Fabricante | Texas Instruments |
Serie | BUF634 |
Numero de parte | BUF634PG4 |
Memoria intermedia de alta velocidad de 250 mA 8-PDIP -40 a 125
Hojas de datos
BUF634 250-mA High-Speed Buffer datasheet
PDF, 1.2 Mb, Revisión: A, Archivo publicado: nov 25, 2015
Extracto del documento
Precios
Estado
Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
Disponibilidad de muestra del fabricante | No |
Embalaje
Pin | 8 |
Package Type | P |
Industry STD Term | PDIP |
JEDEC Code | R-PDIP-T |
Package QTY | 50 |
Carrier | TUBE |
Device Marking | BUF634P |
Width (mm) | 6.35 |
Length (mm) | 9.81 |
Thickness (mm) | 3.9 |
Pitch (mm) | 2.54 |
Max Height (mm) | 5.08 |
Mechanical Data | Descargar |
Paramétricos
Diff Gain | 0.4 % |
Diff Phase | 0.1 deg |
Number of Channels | 1 |
Operating Temperature Range | -40 to 125 C |
Output Current(Typ) | 250 mA |
Package Group | PDIP |
Package Size: mm2:W x L | See datasheet (PDIP) PKG |
Rating | Catalog |
Vs(Max) | 36 V |
Vs(Min) | 4.5 V |
Plan ecológico
RoHS | Obediente |
Notas de aplicación
- Add Current Limit to the BUF634PDF, 63 Kb, Archivo publicado: sept 27, 2000
Modern buffer amplifiers, such as the BUF634, are often used with op amps to drive high-current demand loads such as cables or eletro-mechanical devices. BUF634 features internal overload protection to prevent its destruction under fault conditions. Internal current limit protects circuitry and wirebonds from excessive current. Internal over-temp shut down protects the device from excessive temper - Combining an Amplifier with the BUF634PDF, 72 Kb, Archivo publicado: oct 2, 2000
The following application note descibes a combination using an op amp with the high-speed buffer BUF634 located in its feedback loop. Depending upon the op amp selected, large signals with output currents of over 500mA into the MHz range can be attained. - Power Amplifier Stress and Power Handling LimitationsPDF, 55 Kb, Archivo publicado: sept 27, 2000
To achieve reliable power amplifier designs you must consider the stress on the amplifier compared to its power handling limitations. Power handling limits are specified by the Safe Operating Area (SOA) curves of the power amp. Stress on the amplifier depends on amplifier load and signal conditions which can be evaluated with straightforward techniques.
Linea modelo
Serie: BUF634 (12)
Clasificación del fabricante
- Semiconductors > Amplifiers > Special Function Amplifiers > Video Amplifiers