Datasheet Texas Instruments SN74CBTK6800PWR — Ficha de datos

Fabricante	Texas Instruments
Serie	SN74CBTK6800
Numero de parte	SN74CBTK6800PWR

Conmutador de bus FET de 10 bits con salidas precargadas y circuito de subimpulso de abrazadera activa 24-TSSOP -40 a 85

Hojas de datos

Descargar

PDF, 816 Kb, Revisión: B, Archivo publicado: oct 20, 2000

Extracto del documento

Precios

Estado

Estado del ciclo de vida	Activo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante	No

Embalaje

Pin	24
Package Type	PW
Industry STD Term	TSSOP
JEDEC Code	R-PDSO-G
Package QTY	2000
Carrier	LARGE T&R
Device Marking	BK6800
Width (mm)	4.4
Length (mm)	7.8
Thickness (mm)	1
Pitch (mm)	.65
Max Height (mm)	1.2
Mechanical Data	Descargar

Paramétricos

Additional Features	Powered off protection,-2V undershoot protection,Pre-charged signal path
Bandwidth	200 MHz
Configuration	1:1 SPST
ESD Charged Device Model	1 kV
ESD HBM	2 kV
Input/Ouput Voltage(Max)	5.5 V
Input/Output Continuous Current(Max)	128 mA
Input/Output OFF-state Capacitance(Typ)	8.5 pF
Number of Channels	10
OFF-state leakage current(Max)	5 µA
ON-state leakage current(Max)	5 µA
Operating Temperature Range	-40 to 85 C
Package Group	TSSOP
Package Size: mm2:W x L	24TSSOP: 50 mm2: 6.4 x 7.8(TSSOP) PKG
Rating	Catalog
Ron(Max)	20 Ohms
Ron(Typ)	3 Ohms
Supply Current(Max)	10 uA
Supply Range	5.5 Max
VIH(Min)	2 V
VIL(Max)	0.8 V
Vdd(Max)	5.5 V
Vdd(Min)	4 V
Vss(Max)	N/A V
Vss(Min)	N/A V

Plan ecológico

RoHS

Obediente

Notas de aplicación

Descargar
FET Switches in Docking Stations
PDF, 92 Kb, Archivo publicado: jul 23, 2003
Docking stations for portable electronics require the capability to connect a system with a live-running bus to a disabled or powered-down system. This hot-docking event must not cause any electrical damage, electrical signal glitches, or data corruption. This application report explains the use of TI FET bus-switch products with precharge to accomplish this connection.
Descargar
Flexible Voltage-Level Translation With CBT Family Devices
PDF, 40 Kb, Archivo publicado: jul 20, 1999
Voltage translation between buses with incompatible logic levels can be accomplished using Texas Instruments (TI) translation-voltage clamps (TVC) or standard crossbar technology (CBT) devices. CBT devices in this application offer flexibility in designs, protection of circuits that are sensitive to high-state voltage-level overshoots, and cost efficiency.
Descargar
5-V To 3.3-V Translation With the SN74CBTD3384 (Rev. B)
PDF, 35 Kb, Revisión: B, Archivo publicado: marzo 1, 1997
The emergence of low-voltage technology required existing 5-V systems to interact with 3.3-V systems. Compatibility issues of mixed-mode operation created the need for 5-V to 3.3-V translation. Buffers and transceivers serve as effective translators. While providing additional drive, these devices also add propagation delay and require directional control. In cases where additional drive is not
Descargar
3.3-V to 2.5-V Translation with Texas Instruments Crossbar Technology (Rev. A)
PDF, 32 Kb, Revisión: A, Archivo publicado: abr 3, 1998
Descargar
VOLTAGE LEVEL TRANSLATION (SL) - Family
PDF, 111 Kb, Archivo publicado: sept 21, 2011
Descargar
Bus FET Switch Solutions for Live Insertion Applications
PDF, 300 Kb, Archivo publicado: feb 7, 2003
In today?s competitive computing and networking industry, any equipment downtime due to component interconnects or bus failures impedes communication, hinders productivity and hampers financial growth. In recognizing this increasingly costly unplanned downtime, the industry introduced live-insertion technology to minimize the impact of any such failures. The live-insertion feature enables a networ

Linea modelo

Serie: SN74CBTK6800 (2)

SN74CBTK6800DBQR SN74CBTK6800PWR

Clasificación del fabricante

Semiconductors > Switches and Multiplexers > Analog Switches/Muxes