Datasheet Texas Instruments TAS6424QDKQRQ1 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | TAS6424-Q1 |
| Numero de parte | TAS6424QDKQRQ1 |
75-W 2.1-MHz Entrada digital Amplificador de audio automotriz de clase D de 4 canales 56-HSSOP -40 a 125
Hojas de datos
TAS6424-Q1 75-W,​​​ 2-MHz Digital Input 4-Channel Automotive Class-D Audio Amplifier With Load-Dump Protection and I2C Diagnostics datasheet
PDF, 2.5 Mb, Revisión: A, Archivo publicado: oct 5, 2016
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí |
Embalaje
| Pin | 56 |
| Package Type | DKQ |
| Industry STD Term | HSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 1000 |
| Carrier | LARGE T&R |
| Device Marking | TAS6424 |
| Width (mm) | 7.49 |
| Length (mm) | 18.41 |
| Thickness (mm) | 2.59 |
| Pitch (mm) | .635 |
| Max Height (mm) | 2.79 |
| Mechanical Data | Descargar |
Paramétricos
| Analog Supply (V) | 4.5 Max |
| Audio Input Type | Digital |
| Closed/Open Loop | Closed |
| Control Interface | I2C |
| Operating Temperature Range | -40 to 125 C |
| Package Group | HSSOP |
| Package Size: mm2:W x L | 56HSSOP: 191 mm2: 10.35 x 18.42(HSSOP) PKG |
| Power Stage Supply(Max) | 26.4 V |
| Power Stage Supply(Min) | 4.5 V |
| Power to Bridge Tied Load(Max) | 75 W |
| Power to Parallel Bridge Tied Load(Max) | 150 W |
| Rating | Automotive |
| Sampling Rate(Max) | 96 kHz |
| Sampling Rate(Min) | 44.1 kHz |
| Speaker Channels | 4 Max |
| Supported Bridge Tied Load(Min) | 2 Ohms |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: TAS6424LQ1EVM
TAS6424LQ1 2.1MHz 4Ch Digital Input Class-D Audio Amplifier w/I2C Diagnostics Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: TAS6424Q1EVM
TAS6424Q1 2.1MHz 4Ch Digital Input Class-D Audio Amplifier w/I2C Diagnostics Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: TAS6422Q1EVM
TAS6422Q1 2.1MHz 2Ch Digital Input Class-D Audio Amplifier w/I2C Diagnostics Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- TAS6424-Q1 Inductor Selection GuidePDF, 727 Kb, Archivo publicado: jun 12, 2017
New technologies in class-D amplifiers change the inductor requirements in the LC filter. The important parameters are discussed to understand their effects on determining the proper inductor needed for high frequency class-D amplifiers. - LC Filter Design (Rev. A)PDF, 1.6 Mb, Revisión: A, Archivo publicado: nov 9, 2016
- Class-D Amplifier External Load DiagnosticsPDF, 155 Kb, Archivo publicado: enero 23, 2017
This application report provides design information for an external load diagnostics circuit to detect andidentify electrical faults between the output of an audio amplifier and a target speaker. While theTPA3111D1-Q1 class-D amplifier is used as an example in this application note, this design methodologyis relevant for most class-D amplifiers to provide external fault diagnostics.
Linea modelo
Serie: TAS6424-Q1 (2)
- TAS6424QDKQQ1 TAS6424QDKQRQ1
Clasificación del fabricante
- Semiconductors > Audio > Mid-Power Audio Amplifiers (10-50W) > Digital I2S Input Class-D