Datasheet Texas Instruments SN74LVC1G79DBVT — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | SN74LVC1G79 |
| Numero de parte | SN74LVC1G79DBVT |
Flip-Flop tipo D de borde positivo disparado solo 5-SOT-23 -40 a 125
Hojas de datos
SN74LVC1G79 Single Positive-Edge-Triggered D-Type Flip-Flop datasheet
PDF, 1.2 Mb, Revisión: U, Archivo publicado: abr 7, 2017
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 5 | 5 | 5 |
| Package Type | DBV | DBV | DBV |
| Industry STD Term | SOT-23 | SOT-23 | SOT-23 |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 250 | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R | SMALL T&R |
| Device Marking | C79R | C795 | C79F |
| Width (mm) | 1.6 | 1.6 | 1.6 |
| Length (mm) | 2.9 | 2.9 | 2.9 |
| Thickness (mm) | 1.2 | 1.2 | 1.2 |
| Pitch (mm) | .95 | .95 | .95 |
| Max Height (mm) | 1.45 | 1.45 | 1.45 |
| Mechanical Data | Descargar | Descargar | Descargar |
Paramétricos
| 3-State Output | No |
| Bits | 1 |
| F @ Nom Voltage(Max) | 150 Mhz |
| Gate Type | FLIP-FLOP |
| ICC @ Nom Voltage(Max) | 0.01 mA |
| Logic | True |
| Operating Temperature Range | -40 to 125,-40 to 85 C |
| Output Drive (IOL/IOH)(Max) | 32/-32 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rating | Catalog |
| Schmitt Trigger | No |
| Special Features | Ioff,down translation to Vcc,low power |
| Sub-Family | D-Type Flip-Flop |
| Technology Family | LVC |
| VCC(Max) | 5.5 V |
| VCC(Min) | 1.65 V |
| Voltage(Nom) | 1.8,2.5,3.3,5 V |
| tpd @ Nom Voltage(Max) | 12,8.5,6,5 ns |
Plan ecológico
| RoHS | Obediente |
Notas de aplicación
- LVC Characterization InformationPDF, 114 Kb, Archivo publicado: dic 1, 1996
This document provides characterization information about low-voltage logic (LVL) that operates from a 3.3-V power supply. It addresses the issues of interfacing to 5-V logic ac performance power considerations input and output characteristics and signal integrity for this family of devices. - Use of the CMOS Unbuffered Inverter in Oscillator CircuitsPDF, 796 Kb, Archivo publicado: nov 6, 2003
CMOS devices have a high input impedance high gain and high bandwidth. These characteristics are similar to ideal amplifier characteristics and hence a CMOS buffer or inverter can be used in an oscillator circuit in conjunction with other passive components. Now CMOS oscillator circuits are widely used in high-speed applications because they are economical easy to use and take significantly
Linea modelo
Serie: SN74LVC1G79 (10)
Clasificación del fabricante
- Semiconductors > Logic > Little Logic