Datasheet Texas Instruments UC2853DTR — Ficha de datos

FabricanteTexas Instruments
SerieUC2853
Numero de parteUC2853DTR
Datasheet Texas Instruments UC2853DTR

Preregulador de factor de alta potencia 8-SOIC -25 a 85

Hojas de datos

High Power Factor Preregulator datasheet
PDF, 395 Kb, Archivo publicado: sept 5, 1999
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin8
Package TypeD
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY2500
CarrierLARGE T&R
Device MarkingUC2853D
Width (mm)3.91
Length (mm)4.9
Thickness (mm)1.58
Pitch (mm)1.27
Max Height (mm)1.75
Mechanical DataDescargar

Paramétricos

Control MethodCCM
Device TypeSingle-phase PFC
Operating Supply Current10 mA
Operating Supply(Max)40 V
Operating Temperature Range-25 to 85 C
Package GroupSOIC
Package Size: mm2:W x L8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Peak Output Sink Current Gate Drive1 A
Peak Output Source Current Gate Drive-1 A
Practical Operating Frequency(Max)0.115 MHz
RatingCatalog
Special FeaturesAverage Current Mode,OVP
Startup Current0.25 mA
UVLO Thresholds On/Off11.5/9.5 V

Plan ecológico

RoHSObediente

Notas de aplicación

  • DN-77 Overcurrent Shutdown with the UC3853
    PDF, 44 Kb, Archivo publicado: sept 5, 1999
    Boost converters are susceptible to large inrush currents at startup and with step changes in VLINE, because the output capacitor is connected directly to the input through the boost diode. This design note describes and provides a schematic for a circuit that provides overcurrent shutdown using the UC3853 High Power-Factor Preregulator. The UC3853 provides simple yet high-performance active power
  • DN-78 UC3853 Demo Board
    PDF, 204 Kb, Archivo publicado: sept 5, 1999
    This design note describes a demo board for the UC3853 8-pin, High Power-Factor Preregulator Integrated Circuit. This demo board was designed for 100W, 75kHz operation over a universal input-voltage range (80VAC to 270VAC). A parts list and schematic diagram for the typical application circuit are included in this design note.
  • U-159 Boost Power Factor Corrector Design with the UC3853
    PDF, 466 Kb, Archivo publicado: sept 5, 1999
    The UC3853 provides high-performance power-factor correction (PFC) for low- to medium-power applications with minimal complexity. It provides power supplies in the range of 10-200W with a low-distortion, power-factor-corrected input current, a regulated output voltage, and operation over a wide range of input voltages. The UC3853 uses average current mode control and works with either a boost or f

Linea modelo

Serie: UC2853 (5)

Clasificación del fabricante

  • Semiconductors > Power Management > Offline and Isolated DC/DC Controllers and Converters > Power Factor Correction