Datasheet Texas Instruments UC3853DTR — Ficha de datos

Fabricante	Texas Instruments
Serie	UC3853
Numero de parte	UC3853DTR

Preregulador de factor de alta potencia 8-SOIC 0 a 70

Hojas de datos

Descargar

PDF, 395 Kb, Archivo publicado: sept 5, 1999

Extracto del documento

Precios

Estado

Estado del ciclo de vida	Activo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante	No

Embalaje

Pin	8
Package Type	D
Industry STD Term	SOIC
JEDEC Code	R-PDSO-G
Package QTY	2500
Carrier	LARGE T&R
Device Marking	UC3853D
Width (mm)	3.91
Length (mm)	4.9
Thickness (mm)	1.58
Pitch (mm)	1.27
Max Height (mm)	1.75
Mechanical Data	Descargar

Paramétricos

Control Method	CCM
Device Type	Single-phase PFC
Operating Supply Current	10 mA
Operating Supply(Max)	40 V
Operating Temperature Range	0 to 70 C
Package Group	SOIC
Package Size: mm2:W x L	8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Peak Output Sink Current Gate Drive	1 A
Peak Output Source Current Gate Drive	-1 A
Practical Operating Frequency(Max)	0.115 MHz
Rating	Catalog
Special Features	Average Current Mode,OVP
Startup Current	0.25 mA
UVLO Thresholds On/Off	11.5/9.5 V

Plan ecológico

RoHS

Obediente

Notas de aplicación

Descargar
DN-77 Overcurrent Shutdown with the UC3853
PDF, 44 Kb, Archivo publicado: sept 5, 1999
Boost converters are susceptible to large inrush currents at startup and with step changes in VLINE, because the output capacitor is connected directly to the input through the boost diode. This design note describes and provides a schematic for a circuit that provides overcurrent shutdown using the UC3853 High Power-Factor Preregulator. The UC3853 provides simple yet high-performance active power
Descargar
DN-78 UC3853 Demo Board
PDF, 204 Kb, Archivo publicado: sept 5, 1999
This design note describes a demo board for the UC3853 8-pin, High Power-Factor Preregulator Integrated Circuit. This demo board was designed for 100W, 75kHz operation over a universal input-voltage range (80VAC to 270VAC). A parts list and schematic diagram for the typical application circuit are included in this design note.
Descargar
U-159 Boost Power Factor Corrector Design with the UC3853
PDF, 466 Kb, Archivo publicado: sept 5, 1999
The UC3853 provides high-performance power-factor correction (PFC) for low- to medium-power applications with minimal complexity. It provides power supplies in the range of 10-200W with a low-distortion, power-factor-corrected input current, a regulated output voltage, and operation over a wide range of input voltages. The UC3853 uses average current mode control and works with either a boost or f
Descargar
AC Requirements for Power Factor Correction Circuits
PDF, 29 Kb, Archivo publicado: marzo 28, 2002
This technical brief identifies the recommended range of IAC for each of the devices within the UCC3854 family of PFC controllers.

Linea modelo

Serie: UC3853 (5)

UC3853D UC3853DG4 UC3853DTR UC3853N UC3853NG4

Clasificación del fabricante

Semiconductors > Power Management > Offline and Isolated DC/DC Controllers and Converters > Power Factor Correction