Datasheet Texas Instruments TL751M08QKVURQ1 — Ficha de datos

TL750Mxx-Q1, TL751Mxx-Q1
SGLS312J – SEPTEMBER 2005 – REVISED JUNE 2011 www.ti.com AUTOMOTIVE LOW-DROPOUT VOLTAGE REGULATORS
Check for Samples: TL750Mxx-Q1, TL751Mxx-Q1 FEATURES 1 Qualified for Automotive Applications
Low Dropout Voltage, Less Than 0.6 V at
750 mA
Low Quiescent Current
TTL-and CMOS-Compatible Enable on
TL751M Series Load-Dump Protection
Overvoltage Protection
Internal Thermal Overload Protection
Internal Overcurrent-Limiting Circuitry DESCRIPTION
The TL750M and TL751M series are low-dropout positive voltage regulators specifically designed for automotive
applications. The TL750M and TL751M series incorporate onboard overvoltage and current-limiting protection
circuitry to protect the devices and the regulated system. Both series are fully protected against load-dump and
reverse-battery conditions. Load-dump protection is up to a maximum of 60 V at the input of the device. Low
quiescent current, even during full-load conditions, makes the TL750M and TL751M series ideal for use in
applications that are permanently connected to the vehicle battery.
The TL750M and TL751M series offers 5-V, 8-V, and 12-V options. The TL751M series has the addition of an
enable (ENABLE) input. The ENABLE input gives complete control over power up, allowing sequential power up
or shutdown. When ENABLE is high, the regulator output is placed in the high-impedance state. The ENABLE
input is TTL and CMOS compatible.
The TL750Mxx and TL751Mxx are characterized for operation over the virtual junction temperature range –40°C
to 125В°C. …