1% de precisión, regulador lineal ajustable de 1.5 A con protección contra cortocircuitos 3-TO-252 -40 a 125
PDF, 104 Kb, Archivo publicado: oct 3, 2002
PDF, 82 Kb, Revisión: B, Archivo publicado: mayo 5, 2013
This application report discusses improving power supply reliability with IC power regulators.
PDF, 314 Kb, Revisión: B, Archivo publicado: mayo 5, 2013
Until now all of the 3-terminal power IC voltage regulators have a fixed output voltage. In spite of this limitation their ease of use low cost and full on-chip overload protection have generated wide acceptance. Now with the introduction of the LM117 it is possible to use a single regulator for any output voltage from 1.2 V to 37 V at 1.5A. Selecting close-tolerance outp
PDF, 684 Kb, Revisión: B, Archivo publicado: mayo 6, 2013
The purpose of this application report is to aid the user in maximizing the power handling capability of Texas Instruments power packages by using the SOT-223 as an example.
PDF, 284 Kb, Revisión: A, Archivo publicado: mayo 5, 2013
When working with voltage regulator circuits the designer is often confronted with the need to calculatethe tolerance of the regulated output voltage. For fixed voltage regulators this problem is easily managedbecause the required information is directly supplied on the semiconductor manufacturer's data sheet.
PDF, 814 Kb, Revisión: A, Archivo publicado: mayo 6, 2013
The LM340-XX are three terminal 1.0A positive voltage regulators with preset output voltages of 5.0V or15V. The LM340 regulators are complete 3-terminal regulators requiring no external components fornormal operation. However by adding a few parts one may improve the transient response provide for avariable output voltage or increase the output current. Included on the chip are all of t
PDF, 300 Kb, Revisión: B, Archivo publicado: mayo 6, 2013
This application note discusses the operation and compensation of linear regulators.
PDF, 197 Kb, Archivo publicado: oct 21, 1999
This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab
PDF, 509 Kb, Revisión: A, Archivo publicado: jun 4, 2008
PDF, 75 Kb, Archivo publicado: mayo 8, 2010
The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.
PDF, 82 Kb, Revisión: F, Archivo publicado: jun 27, 2019