Datasheet Texas Instruments OPA653IDBVR — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | OPA653 |
| Numero de parte | OPA653IDBVR |
500MHz, ganancia fija de + 2V / V, amplificador de entrada JFET 5-SOT-23 -40 a 85
Hojas de datos
Wideband, Fixed Gain, JFET-Input Amplifier datasheet
PDF, 1.2 Mb, Revisión: A, Archivo publicado: nov 4, 2009
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 5 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | BZW |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | Descargar |
Paramétricos
| 2nd Harmonic | 75 dBc |
| 3rd Harmonic | 96 dBc |
| @ MHz | 10 |
| Acl, min spec gain | 2 V/V |
| Additional Features | Decompensated |
| Architecture | FET |
| BW @ Acl | 500 MHz |
| CMRR(Min) | 62 dB |
| CMRR(Typ) | 66 dB |
| GBW(Typ) | 500 MHz |
| Input Bias Current(Max) | 50 pA |
| Iq per channel(Max) | 33 mA |
| Iq per channel(Typ) | 32 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 10 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 70 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 2675 V/us |
| Total Supply Voltage(Max) | 13 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 6.1 nV/rtHz |
| Vn at Flatband(Typ) | 6.1 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 5 mV |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: OPA653EVM
OPA653EVM Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Linea modelo
Serie: OPA653 (3)
- OPA653IDBVR OPA653IDBVT OPA653IDRBT
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)