Datasheet Texas Instruments TUSB6250PFCR — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | TUSB6250 |
| Numero de parte | TUSB6250PFCR |
Solución de puente USB 2.0 de baja potencia y alta velocidad ATA / ATAPI 80-TQFP
Hojas de datos
TUSB6250 USB 2.0 to ATA/ATAPI Bridge Controller datasheet
PDF, 542 Kb, Revisión: E, Archivo publicado: abr 4, 2008
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Obsoleto (El fabricante ha interrumpido la producción del dispositivo) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 80 |
| Package Type | PFC |
| Industry STD Term | TQFP |
| JEDEC Code | S-PQFP-G |
| Width (mm) | 12 |
| Length (mm) | 12 |
| Thickness (mm) | 1 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Descargar |
Paramétricos
| Application Interface | ATA ATAPI IDE |
| Approx. Price (US$) | 2.80 | 1ku |
| GPIO Pins(#) | 16 |
| Integrated MCU Architecture | 8051 WARP |
| MCU Code Space(KBytes) | 32 |
| MCU Speed(Max)(MIPs) | 30 |
| Number of Endpoints IN | 4 |
| Number of Endpoints OUT | 4 |
| Operating Temperature Range(C) | 0 to 70 |
| Package Group | TQFP |
| Package Size: mm2:W x L (PKG) | 80TQFP: 196 mm2: 14 x 14(TQFP) |
| Rating | Catalog |
| Special Features | Bulk Transfer Control Transfer DMA Interrupt Transfer Remote Wakeup |
| Supply Voltage(s)(V) | 3.3 |
| USB Speed(Mbps) | 480 |
Plan ecológico
| RoHS | Desobediente |
| Pb gratis | No |
Notas de aplicación
- TUSB6250 Power Supply SequencingPDF, 39 Kb, Archivo publicado: feb 24, 2005
Power Supply Sequencing - TUSB6250 Bootcode Application NotePDF, 573 Kb, Archivo publicado: enero 7, 2004
The TUSB6250 bootcode is a start-up code stored as a ROM image within the TUS6250 device. An embedded microcontroller starts executing this code after power-on reset. Once the code is running, it loads application firmware from either an external memory device or the USB host controller. After the code has finished downloading, the bootcode releases its control to the application firmware.This - TUSB6250 FAQ (Rev. A)PDF, 695 Kb, Revisión: A, Archivo publicado: enero 28, 2005
This document is a compilation of frequently asked questions regarding the TUSB6250 USB 2.0 to ATA/ATAPI Bridge Controller. - Selection and Specification of Crystals for Texas Instruments USB 2.0 DevicesPDF, 61 Kb, Archivo publicado: dic 12, 2002
- Using the TUSBxxxx EEPROM Programmer (Rev. B)PDF, 264 Kb, Revisión: B, Archivo publicado: jun 9, 2011
- VIDs, PIDs, and Firmware: Design Decisions When Using TI USB Device ControllersPDF, 162 Kb, Archivo publicado: sept 24, 2003
System designers using TI USB controller devices must make certain design decisions involving the vendor ID (VID) and product ID (PID) of the USB device and the location of firmware. If these are not configured properly, the device will not be enumerated correctly by the USB host.This document discusses how these are handled within a system using one of the TI USB device controllers. These con
Linea modelo
Serie: TUSB6250 (3)
- TUSB6250PFC TUSB6250PFCG4 TUSB6250PFCR
Clasificación del fabricante
- Semiconductors > Interface > USB > USB Peripheral