Datasheet Texas Instruments UCC28511N — Ficha de datos
Fabricante | Texas Instruments |
Serie | UCC28511 |
Numero de parte | UCC28511N |
Controladores combinados PFC / PWM avanzados 20-PDIP -40 a 105
Hojas de datos
Advanced PFC/PWM Combination Controllers datasheet
PDF, 1.5 Mb, Revisión: C, Archivo publicado: sept 14, 2005
Extracto del documento
Precios
Estado
Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
Disponibilidad de muestra del fabricante | Sí |
Embalaje
Pin | 20 |
Package Type | N |
Industry STD Term | PDIP |
JEDEC Code | R-PDIP-T |
Package QTY | 20 |
Carrier | TUBE |
Device Marking | UCC28511N |
Width (mm) | 6.35 |
Length (mm) | 24.33 |
Thickness (mm) | 4.57 |
Pitch (mm) | 2.54 |
Max Height (mm) | 5.08 |
Mechanical Data | Descargar |
Paramétricos
Control Method | CCM |
Device Type | PFC+PWM |
Operating Supply Current | 4 mA |
Operating Supply(Max) | 18 V |
Operating Temperature Range | -40 to 105 C |
Package Group | PDIP |
Package Size: mm2:W x L | See datasheet (PDIP) PKG |
Peak Output Sink Current Gate Drive | 3 A |
Peak Output Source Current Gate Drive | -2 A |
Practical Operating Frequency(Max) | 0.5 MHz |
Rating | Catalog |
Special Features | Average Current Mode,Enable,OVP |
Startup Current | 0.1 mA |
UVLO Thresholds On/Off | 10.2/9.7 V |
Plan ecológico
RoHS | Obediente |
Pb gratis | Sí |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: UCC28521EVM
UCC28521 Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: UCC28514EVM
UCC28514 Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- UCC28517 100-W PFC power converter with 12-V, 8-W bias supply, Part 2PDF, 224 Kb, Archivo publicado: feb 28, 2005
To conclude the review of the UCC28517 PFC supply, this article covers the design of the second 12-V, 8-W power stage to be used as an auxiliary bias supply. - UCC28517 100-W PFC power converter with 12-V, 8-W bias supply, Part 1PDF, 202 Kb, Archivo publicado: feb 28, 2005
Power factor corrected (PFC) preregulators are generally used in ac/dc converters operating above 75 W or to meet line harmonic requirements. This article reviews the design of a 100-W ac/dc power stage with PFC. - Bootstrap Circuit for Green Mode ApplicationsPDF, 111 Kb, Archivo publicado: enero 27, 2006
- A New Synchronization Circuit for Power Converters (Rev. A)PDF, 209 Kb, Revisión: A, Archivo publicado: abr 21, 2010
The synchronization of multiple PWM and PFC controllers is desirable for many reasons. The most common reason is that it keeps all the noise at one particular frequency and makes it easier to filter. The circuit described changes the slope of the ramp to lock the converter’s switching frequency to an applied signal by a phase locked loop turning it into a voltage controlled oscillator. Furthermore - Startup Current transient of the Leading Edge Triggered PFC ControllersPDF, 43 Kb, Archivo publicado: jun 30, 2004
- Avoiding Audible Noise at Light Loads When Using Leading Edge Triggered PFC Con (Rev. C)PDF, 57 Kb, Revisión: C, Archivo publicado: abr 13, 2011
This application note applies to the TI average current mode, leading edge modulation PFC controllers. See Applicable Device Table for part numbers.
Linea modelo
Serie: UCC28511 (4)
- UCC28511DW UCC28511DWG4 UCC28511DWR UCC28511N
Clasificación del fabricante
- Semiconductors > Power Management > Offline and Isolated DC/DC Controllers and Converters > Power Factor Correction