Datasheet Texas Instruments TLV342IRUGR — Ficha de datos

Amplificadores operacionales CMOS de bajo voltaje y salida de riel a riel 10-X2QFN -40 a 125

Hojas de datos

PDF, 2.1 Mb, Revisión: D, Archivo publicado: abr 29, 2016

Extracto del documento

Estado del ciclo de vida	Activo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante	Sí

Additional Features	N/A
Architecture	CMOS
CMRR(Min)	75 dB
CMRR(Typ)	90 dB
GBW(Typ)	2.2 MHz
Input Bias Current(Max)	200 pA
Iq per channel(Max)	0.15 mA
Iq per channel(Typ)	0.07 mA
Number of Channels	2
Offset Drift(Typ)	1.9 uV/C
Operating Temperature Range	-40 to 125 C
Output Current(Typ)	113 mA
Package Group	X2QFN
Package Size: mm2:W x L	10X2QFN: 3 mm2: 2 x 1.5(X2QFN) PKG
Rail-to-Rail	Out
Rating	Catalog
Slew Rate(Typ)	0.9 V/us
Total Supply Voltage(Max)	5.5 +5V=5, +/-5V=10
Total Supply Voltage(Min)	1.5 +5V=5, +/-5V=10
Vn at 1kHz(Typ)	33 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)	4 mV

RoHS

Obediente

Descargar
Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps
PDF, 61 Kb, Archivo publicado: marzo 23, 2000
The switch-mode power supply primary current is often sensed using a power resistor. Using an op amp to amplify the current-sense signal can reduce cost and improve noise performance and efficiency. This report reviews the advantages of using an op amp circuit and analyzes the design criteria needed to choose the proper op amp.
Descargar
Use of Rail-to-Rail Operational Amplifiers (Rev. A)
PDF, 159 Kb, Revisión: A, Archivo publicado: dic 22, 1999
This application report assists design engineers to understand the functionality and benefits of rail-to-rail operational amplifiers. It shows simplified schematics, functions, and characteristics of the input and output stages. Typical application schematics for rail-to-rail operational amplifiers are also discussed.

Serie: TLV342 (4)

Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps