Datasheet Texas Instruments THS4011CDGN — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | THS4011 |
| Numero de parte | THS4011CDGN |
Amplificador de retroalimentación de voltaje de baja distorsión de 290 MHz 8-MSOP-PowerPAD 0 a 70
Hojas de datos
290-MHz Low-Distortion High-Speed Amplifiers datasheet
PDF, 1.4 Mb, Revisión: E, Archivo publicado: abr 12, 2010
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 8 |
| Package Type | DGN |
| Industry STD Term | HVSSOP |
| JEDEC Code | S-PDSO-G |
| Package QTY | 80 |
| Carrier | TUBE |
| Device Marking | ACI |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | 1.02 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.1 |
| Mechanical Data | Descargar |
Paramétricos
| 2nd Harmonic | 80 dBc |
| 3rd Harmonic | 80 dBc |
| @ MHz | 1 |
| Acl, min spec gain | 1 V/V |
| Additional Features | N/A |
| Architecture | Bipolar,Voltage FB |
| BW @ Acl | 290 MHz |
| CMRR(Min) | 82 dB |
| CMRR(Typ) | 110 dB |
| GBW(Typ) | 290 MHz |
| Input Bias Current(Max) | 6000000 pA |
| Iq per channel(Max) | 9.5 mA |
| Iq per channel(Typ) | 7.8 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 15 uV/C |
| Operating Temperature Range | -40 to 85,0 to 70 C |
| Output Current(Typ) | 110 mA |
| Package Group | MSOP-PowerPAD |
| Package Size: mm2:W x L | 8MSOP-PowerPAD: 15 mm2: 4.9 x 3(MSOP-PowerPAD) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 310 V/us |
| Total Supply Voltage(Max) | 30 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 10 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 7.5 nV/rtHz |
| Vn at Flatband(Typ) | 7.5 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 6 mV |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: THS4011EVM
THS4011 High Speed Amplifier Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Nulling Input Offset Voltage of Operational AmplifiersPDF, 94 Kb, Archivo publicado: agosto 2, 2000
The input offset voltage of operational amplifiers (op-amps) arises from unavoidable mismatches in the differential input stage of the op-amp circuit caused by mismatched transistor pairs, collector currents, current-gain betas(B), collector or emitter resistors, etc. This application report describes the effects of mismatched components on the input offset voltage, and proposes using an external - Using a Decompensated Operational Amplifier for Improved PerformancePDF, 161 Kb, Archivo publicado: marzo 30, 2001
Decompensated operational amplifiers have improved noise, slew rate, harmonic distortion, etc., but required external compensation for stable operation. This report shows how to compensate such an amplifier and achieve the performance enchancement it provides in a unity-gain configuration.The THS4011 and THS4021 operational amplifiers are used to illustrate the superior performance mentioned a - Using a decompensated op amp for improved performancePDF, 352 Kb, Archivo publicado: marzo 11, 2005
- Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Linea modelo
Serie: THS4011 (14)
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)