Datasheet Texas Instruments OPA234E/2K5E4 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | OPA234 |
| Numero de parte | OPA234E/2K5E4 |
Amplificadores operacionales de baja potencia y precisión de un solo suministro 8-VSSOP -40 a 125
Hojas de datos
OPA234, 2234, 4234: Low Power, Precision Single-Supply Operational Amplifiers datasheet
PDF, 1.0 Mb, Revisión: B, Archivo publicado: abr 10, 2008
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Vista previa (El dispositivo ha sido anunciado pero no está en producción. Las muestras pueden o no estar disponibles) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 8 |
| Package Type | DGK |
| Industry STD Term | VSSOP |
| JEDEC Code | R-PDSO-G |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .97 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.07 |
| Mechanical Data | Descargar |
Paramétricos
| Additional Features | N/A |
| Approx. Price (US$) | 1.40 | 1ku |
| Architecture | Bipolar |
| CMRR(Min)(dB) | 86 |
| CMRR(Typ)(dB) | 106 |
| GBW(Typ)(MHz) | 0.35 |
| Input Bias Current(Max)(pA) | 30000 |
| Iq per channel(Max)(mA) | 0.3 |
| Iq per channel(Typ)(mA) | 0.25 |
| Number of Channels(#) | 1 |
| Offset Drift(Typ)(uV/C) | 0.5 |
| Operating Temperature Range(C) | -40 to 125 |
| Output Current(Typ)(mA) | 11 |
| Package Group | VSSOP |
| Package Size: mm2:W x L (PKG) | See datasheet (PDIP) |
| Rail-to-Rail | In to V- Out |
| Rating | Catalog |
| Slew Rate(Typ)(V/us) | 0.2 |
| Total Supply Voltage(Max)(+5V=5, +/-5V=10) | 36 |
| Total Supply Voltage(Min)(+5V=5, +/-5V=10) | 2.7 |
| Vn at 1kHz(Typ)(nV/rtHz) | 25 |
| Vos (Offset Voltage @ 25C)(Max)(mV) | 0.1 |
Plan ecológico
| RoHS | Desobediente |
| Pb gratis | No |
Notas de aplicación
- Q4 2008 Issue Analog Applications JournalPDF, 1.5 Mb, Archivo publicado: oct 22, 2008
- Tuning in AmplifiersPDF, 44 Kb, Archivo publicado: oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Stop-band limitations of the Sallen-Key, low-pass filterPDF, 573 Kb, Archivo publicado: oct 22, 2008
- Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, Archivo publicado: oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Remove the DC Portion of Signals with the ADS7817PDF, 55 Kb, Archivo publicado: sept 27, 2000
Unwanted portions of a signal, such as a DC pedestal, can be difficult to reject in a single supply circuit. A DC pedestal voltage most typically appears at the output of an operational amplifier with a small signal riding on top of it. This pedestal voltage is required in the analog domain to insure that the small signal that contains the pertinent information never falls below the ground potenti - Op Amp Performance AnalysisPDF, 76 Kb, Archivo publicado: oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Linea modelo
Serie: OPA234 (18)
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps