Datasheet Texas Instruments ADS8413IBRGZT — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | ADS8413 |
| Numero de parte | ADS8413IBRGZT |
16 bits, entrada de difusión unipolar, frecuencia de muestreo de 2MSPS, 4.75V a 5.25V ADC con interfaz serie LVDS 48-VQFN -40 a 85
Hojas de datos
16-Bit, 2-MSPS, LVDS Serial Interface, SAR ADC datasheet
PDF, 1.6 Mb, Archivo publicado: oct 6, 2005
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 48 | 48 |
| Package Type | RGZ | RGZ |
| Industry STD Term | VQFN | VQFN |
| JEDEC Code | S-PQFP-N | S-PQFP-N |
| Package QTY | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R |
| Device Marking | ADS8413I | B |
| Width (mm) | 7 | 7 |
| Length (mm) | 7 | 7 |
| Thickness (mm) | .9 | .9 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | 1 | 1 |
| Mechanical Data | Descargar | Descargar |
Paramétricos
| # Input Channels | 1 |
| Analog Voltage AVDD(Max) | 5.25 V |
| Analog Voltage AVDD(Min) | 4.75 V |
| Architecture | SAR |
| Digital Supply(Max) | 5.25 V |
| Digital Supply(Min) | 2.7 V |
| INL(Max) | 2 +/-LSB |
| Input Range(Max) | 4.2 V |
| Input Range(Min) | 4.2 V |
| Input Type | Differential |
| Integrated Features | Daisy-Chainable,Oscillator |
| Interface | Parallel |
| Multi-Channel Configuration | N/A |
| Operating Temperature Range | -40 to 85 C |
| Package Group | VQFN |
| Package Size: mm2:W x L | 48VQFN: 49 mm2: 7 x 7(VQFN) PKG |
| Power Consumption(Typ) | 290 mW |
| Rating | Catalog |
| Reference Mode | Ext,Int |
| Resolution | 16 Bits |
| SINAD | 92 dB |
| SNR | 92 dB |
| Sample Rate (max) | 2MSPS SPS |
| Sample Rate(Max) | 2 MSPS |
| THD(Typ) | -107 dB |
Plan ecológico
| RoHS | Obediente |
Notas de aplicación
- Connecting ADS8410/13 With Long CablePDF, 773 Kb, Archivo publicado: dic 2, 2005
Many applications require that the analog-to-digital converter (ADC) be located near the field sensor; however, the digital processing often occurs at a distance. Therefore, the input and output signals need to travel through a long cable from the field sensor to the site where digital processing occurs. This application report is a guide for using a 1-meter cable, the Samtec EQCD Series high data - Using ADS8410/13 in Daisy Chain ModePDF, 3.2 Mb, Archivo publicado: mayo 22, 2006
Many applications require multiple analog-to-digital converters (ADC) in a system. Daisy chaining multiple ADCs enables the use of a single data receiver or a small FPGA. It offers easy and minimal digital routing. This application report describes how multiple ADCs (ADS8410/13) work in a daisy-chain mode. The device offers a high-speed (200 Mbps) LVDS serial interface. This application report als - Using ADS8410/13 in Cascade ModePDF, 2.9 Mb, Archivo publicado: jun 8, 2006
Many applications require multiple analog-to-digital converters (ADC) in a system. Cascading multiple ADCs enables the use of a single data receiver or a small FPGA. This offers lower power consumption and independent ADC usage. This application report describes how multiple ADCs (ADS8410/13) work in a cascade mode. The ADS8410/13 integrated circuit offers a high-speed (200 Mbps) LVDS serial inter - Determining Minimum Acquisition Times for SAR ADCs, part 1 (Rev. A)PDF, 227 Kb, Revisión: A, Archivo publicado: nov 10, 2010
This application report analyzes a simple method for calculating minimum acquisition times for successive-approximation register analog-to-digital converters (SAR ADCs). The input structure of the ADC is examined along with the driving circuit. The voltage on the sampling capacitor is then determined for the case when a step function is applied to the input of the driving circuit. Three different - Determining Minimum Acquisition Times for SAR ADCs, part 2PDF, 215 Kb, Archivo publicado: marzo 17, 2011
The input structure circuit of a successive-approximation register analog-to-digital converter (SAR ADC) incombination with the driving circuit forms a transfer function that can be used to determine minimum acquisition times for different types of applied input signals. This application report, which builds on Determining Minimum Acquisition Times for SAR ADCs When a Step Function is Applied to
Linea modelo
Serie: ADS8413 (7)
Clasificación del fabricante
- Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > Precision ADCs (<=10MSPS)