Datasheet Texas Instruments THS3062DDAG3 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | THS3062 |
| Numero de parte | THS3062DDAG3 |
Amplificador de retroalimentación de corriente de alto voltaje y alta velocidad de respuesta 8-SO PowerPAD -40 a 85
Hojas de datos
Low-Distortion, High Slew Rate, Current-Feedback Amplifiers datasheet
PDF, 1.3 Mb, Revisión: B, Archivo publicado: nov 20, 2009
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 8 |
| Package Type | DDA |
| Industry STD Term | HSOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 75 |
| Carrier | TUBE |
| Device Marking | 3062 |
| Width (mm) | 3.9 |
| Length (mm) | 4.89 |
| Thickness (mm) | 1.48 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.7 |
| Mechanical Data | Descargar |
Paramétricos
| 2nd Harmonic | 78 dBc |
| 3rd Harmonic | 81 dBc |
| @ MHz | 10 |
| Acl, min spec gain | 1 V/V |
| Additional Features | N/A |
| Architecture | Bipolar,Current FB |
| BW @ Acl | 300 MHz |
| CMRR(Min) | 60 dB |
| CMRR(Typ) | 72 dB |
| GBW(Typ) | 300 MHz |
| Input Bias Current(Max) | 25000000 pA |
| Iq per channel(Max) | 10 mA |
| Iq per channel(Typ) | 8.3 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 10 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 145 mA |
| Package Group | SO PowerPAD |
| Package Size: mm2:W x L | 8SO PowerPAD: 29 mm2: 6 x 4.9(SO PowerPAD) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 7000 V/us |
| Total Supply Voltage(Max) | 30 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 10 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 2.6 nV/rtHz |
| Vn at Flatband(Typ) | 2.6 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 3.5 mV |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: THS3062EVM
THS3062EVM Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Linea modelo
Serie: THS3062 (5)
- THS3062D THS3062DDA THS3062DDAG3 THS3062DGN THS3062DGNG4
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)