Datasheet Texas Instruments UCC28500N — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | UCC28500 |
| Numero de parte | UCC28500N |
Controlador combinado BiCMOS PFC / PWM 20-PDIP -40 a 85
Hojas de datos
BiCMOS PFC/PWM Combination Controller datasheet
PDF, 1.1 Mb, Revisión: C, Archivo publicado: nov 8, 2001
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 20 |
| Package Type | N |
| Industry STD Term | PDIP |
| JEDEC Code | R-PDIP-T |
| Package QTY | 20 |
| Carrier | TUBE |
| Device Marking | UCC28500N |
| Width (mm) | 6.35 |
| Length (mm) | 24.33 |
| Thickness (mm) | 4.57 |
| Pitch (mm) | 2.54 |
| Max Height (mm) | 5.08 |
| Mechanical Data | Descargar |
Paramétricos
| Control Method | CCM |
| Device Type | PFC+PWM |
| Operating Supply Current | 4 mA |
| Operating Supply(Max) | 18 V |
| Operating Temperature Range | -40 to 85 C |
| Package Group | PDIP |
| Package Size: mm2:W x L | See datasheet (PDIP) PKG |
| Peak Output Sink Current Gate Drive | 1.2 A |
| Peak Output Source Current Gate Drive | -1.2 A |
| Practical Operating Frequency(Max) | 0.2 MHz |
| Rating | Catalog |
| Special Features | Average Current Mode,Enable,OVP |
| Startup Current | 0.15 mA |
| UVLO Thresholds On/Off | 16/10 V |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: UCC38500EVM
UCC38500EVM Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Bootstrap Circuit for Green Mode ApplicationsPDF, 111 Kb, Archivo publicado: enero 27, 2006
- A New Synchronization Circuit for Power Converters (Rev. A)PDF, 209 Kb, Revisión: A, Archivo publicado: abr 21, 2010
The synchronization of multiple PWM and PFC controllers is desirable for many reasons. The most common reason is that it keeps all the noise at one particular frequency and makes it easier to filter. The circuit described changes the slope of the ramp to lock the converter’s switching frequency to an applied signal by a phase locked loop turning it into a voltage controlled oscillator. Furthermore - Startup Current transient of the Leading Edge Triggered PFC ControllersPDF, 43 Kb, Archivo publicado: jun 30, 2004
- Avoiding Audible Noise at Light Loads When Using Leading Edge Triggered PFC Con (Rev. C)PDF, 57 Kb, Revisión: C, Archivo publicado: abr 13, 2011
This application note applies to the TI average current mode, leading edge modulation PFC controllers. See Applicable Device Table for part numbers. - DN-66 UC3854A/B and UC3855A/B Provide Power Limiting with Sinusoidal Input (Rev. A)PDF, 80 Kb, Revisión: A, Archivo publicado: nov 6, 2001
- Accurate PWM Duty Cycle ClampPDF, 58 Kb, Archivo publicado: enero 25, 2002
Power supply applications using current sense transformers require a duty cycle clamp on the pulse width modulator (PWM) to ensure transformer reset. Not all PWMs come with a duty cycle clamp presenting a problem for the power supply designer. This application note shows how to implement a duty cycle clamp by using a simple delay circuit.
Linea modelo
Serie: UCC28500 (3)
- UCC28500DW UCC28500DWG4 UCC28500N
Clasificación del fabricante
- Semiconductors > Power Management > Offline and Isolated DC/DC Controllers and Converters > Power Factor Correction