Datasheet Texas Instruments TPS61150DRCT — Ficha de datos

FabricanteTexas Instruments
SerieTPS61150
Numero de parteTPS61150DRCT
Datasheet Texas Instruments TPS61150DRCT

Dual, 2x 27V, 700mA Switch, 1.2MHz Boost Converter con controlador de LED blanco de inductor único (hasta 2x6) 10-VSON

Hojas de datos

TPS6115x Dual-Output Boost WLED Driver Using Single Inductor datasheet
PDF, 1.1 Mb, Revisión: E, Archivo publicado: nov 30, 2015
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin10
Package TypeDRC
Industry STD TermVSON
JEDEC CodeS-PDSO-N
Package QTY250
CarrierSMALL T&R
Device MarkingBCQ
Width (mm)3
Length (mm)3
Thickness (mm).9
Pitch (mm).5
Max Height (mm)1
Mechanical DataDescargar

Paramétricos

Number of Channels2
Duty Cycle(Max)93 %
LED12
LED Current Per Channel23 mA
Operating Temperature Range-40 to 85 C
Package GroupVSON
Package Size: mm2:W x L10VSON: 9 mm2: 3 x 3(VSON) PKG
Peak Efficiency85 %
RatingCatalog
Shutdown Current(Typ)1.5 uA
Special FeaturesSynchronous Rectification
Switching Frequency(Max)1200 kHz
TopologyBoost
TypeInductive
Vin(Max)6 V
Vin(Min)3 V
Vout(Max)27 V
Vout(Min)2.5 V

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: TPS61150EVM-150
    TPS61150EVM Evaluation Module
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • Using the TPS61150 With Vin > 6V
    PDF, 51 Kb, Archivo publicado: oct 25, 2006
  • Powering Multiple WLED Strings Using the TPS61150/50A
    PDF, 107 Kb, Archivo publicado: marzo 14, 2007
    This application report describes how to regulate more than two white light-emitting diodes (WLED) using the TPS61150/50A high-frequency boost converter with two regulated current outputs for driving WLEDs.
  • TPS61150 Dual Output Boost Converter Drive Up to 14 WLED Keypad LCD Backlight
    PDF, 70 Kb, Archivo publicado: jul 5, 2006
    The TPS61150/1 is a high-frequency boost converter with two regulated current outputs for driving white light-emitting diodes (WLED). The reference design and applications examples in this document show the TPS61150 driving up to 14 WLEDs, a keypad, and a LCD backlight application. The two current outputs are ideal for driving WLED backlight for the sub and main displays in clamshell phones.
  • Analog PWM Dimming in White-LED Drivers
    PDF, 539 Kb, Archivo publicado: dic 21, 2016
    Pulse-width modulation (PWM) is a common type of dimming used to adjust the current in white-LEDdriver devices. PWM dimming takes a rectangle waveform with variable positive duty cycle (D) and adjuststhe LED current proportionally. For many smaller format white LED drivers (7-inch screen size or smaller),the PWM signal is converted to a DC control voltage and made to drive the LED current in
  • Minimizing Ringing at the Switch Node of a Boost Converter
    PDF, 201 Kb, Archivo publicado: sept 15, 2006
    The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter.
  • Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)
    PDF, 1.1 Mb, Revisión: A, Archivo publicado: mayo 11, 2015
  • Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
    PDF, 387 Kb, Revisión: B, Archivo publicado: jun 15, 2017
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, Archivo publicado: jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, Revisión: A, Archivo publicado: dic 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Linea modelo

Clasificación del fabricante

  • Semiconductors > Power Management > LED Driver > Backlight LED Driver