Datasheet Texas Instruments LMH6629SD/NOPB — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | LMH6629 |
| Numero de parte | LMH6629SD/NOPB |
Amplificador operacional de ultra bajo ruido y alta velocidad con apagado 8-WSON -40 a 125
Hojas de datos
LMH6629 Ultra-Low Noise, High-Speed Operational Amplifier with Shutdown datasheet
PDF, 9.2 Mb, Revisión: I, Archivo publicado: dic 5, 2014
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 8 |
| Package Type | NGQ |
| Industry STD Term | WSON |
| JEDEC Code | S-PDSO-N |
| Package QTY | 1000 |
| Carrier | SMALL T&R |
| Device Marking | L6629 |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .8 |
| Pitch (mm) | .5 |
| Max Height (mm) | .8 |
| Mechanical Data | Descargar |
Paramétricos
| 2nd Harmonic | 88 dBc |
| 3rd Harmonic | 74 dBc |
| @ MHz | 1 |
| Acl, min spec gain | 4 V/V |
| Additional Features | Decompensated |
| Architecture | Bipolar,Voltage FB |
| BW @ Acl | 900 MHz |
| CMRR(Min) | 82 dB |
| CMRR(Typ) | 87 dB |
| GBW(Typ) | 4000 MHz |
| Input Bias Current(Max) | 23000 pA |
| Iq per channel(Max) | 16.7 mA |
| Iq per channel(Typ) | 15.5 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 0.45 uV/C |
| Operating Temperature Range | -40 to 125,-40 to 85 C |
| Output Current(Typ) | 250 mA |
| Package Group | WSON |
| Package Size: mm2:W x L | See datasheet (WSON) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 1100 V/us |
| Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 0.69 nV/rtHz |
| Vn at Flatband(Typ) | 0.69 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.78 mV |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: LMH6629SDEVAL
Evaluation Board for the LMH6629
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: LMH730316
LMH730316 Evaluation Board for High-Speed Single Op Amp in the 5-/6-Pin SOT-23 Package
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- AN-1604 Decompensated Operational Amplifiers (Rev. B)PDF, 206 Kb, Revisión: B, Archivo publicado: mayo 1, 2013
This application report discusses the what, why, and where of decompensated op amps. This applicationreport also describes external compensation techniques, such as reducing loop gain, to stabilize op ampsoperated at gains less than the minimum stable gain specified in the datasheet. A comprehensivetreatment of input lead-lag compensation including examples is presented. - OA-14 Improving Amplifier Noise for High 3rd Intercept Amplifiers (Rev. F)PDF, 594 Kb, Revisión: F, Archivo publicado: mayo 1, 2013
This application report discusses improving Amplifier Noise for High 3rd Intercept Amplifiers. - Transimpedance Amplifiers (TIA): Choosing the Best Amplifier for the job (Rev. A)PDF, 153 Kb, Revisión: A, Archivo publicado: mayo 16, 2017
This application note is intended as a guide for the designer looking to amplify the small signal from a photodiode or avalanche diode so that it would be large enough for further processing (e.g. data acquisition) or to trigger some other event in a system. The challenge in doing so, as always, is to not degrade the signal such that it becomes indistinguishable from random noi - Considerations for High-Gain Multistage DesignsPDF, 347 Kb, Archivo publicado: mayo 13, 2013
Linea modelo
Serie: LMH6629 (7)
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)