Datasheet Texas Instruments UCC28500DW — Ficha de datos

FabricanteTexas Instruments
SerieUCC28500
Numero de parteUCC28500DW
Datasheet Texas Instruments UCC28500DW

Controlador combinado BiCMOS PFC / PWM 20-SOIC -40 a 85

Hojas de datos

BiCMOS PFC/PWM Combination Controller datasheet
PDF, 1.1 Mb, Revisión: C, Archivo publicado: nov 8, 2001
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin20
Package TypeDW
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY25
CarrierTUBE
Device MarkingUCC28500DW
Width (mm)7.5
Length (mm)12.8
Thickness (mm)2.35
Pitch (mm)1.27
Max Height (mm)2.65
Mechanical DataDescargar

Paramétricos

Control MethodCCM
Device TypePFC+PWM
Operating Supply Current4 mA
Operating Supply(Max)18 V
Operating Temperature Range-40 to 85 C
Package GroupSOIC
Package Size: mm2:W x L20SOIC: 132 mm2: 10.3 x 12.8(SOIC) PKG
Peak Output Sink Current Gate Drive1.2 A
Peak Output Source Current Gate Drive-1.2 A
Practical Operating Frequency(Max)0.2 MHz
RatingCatalog
Special FeaturesAverage Current Mode,Enable,OVP
Startup Current0.15 mA
UVLO Thresholds On/Off16/10 V

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: UCC38500EVM
    UCC38500EVM Evaluation Module
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • Bootstrap Circuit for Green Mode Applications
    PDF, 111 Kb, Archivo publicado: enero 27, 2006
  • A New Synchronization Circuit for Power Converters (Rev. A)
    PDF, 209 Kb, Revisión: A, Archivo publicado: abr 21, 2010
    The synchronization of multiple PWM and PFC controllers is desirable for many reasons. The most common reason is that it keeps all the noise at one particular frequency and makes it easier to filter. The circuit described changes the slope of the ramp to lock the converter’s switching frequency to an applied signal by a phase locked loop turning it into a voltage controlled oscillator. Furthermore
  • Startup Current transient of the Leading Edge Triggered PFC Controllers
    PDF, 43 Kb, Archivo publicado: jun 30, 2004
  • Avoiding Audible Noise at Light Loads When Using Leading Edge Triggered PFC Con (Rev. C)
    PDF, 57 Kb, Revisión: C, Archivo publicado: abr 13, 2011
    This application note applies to the TI average current mode, leading edge modulation PFC controllers. See Applicable Device Table for part numbers.
  • DN-66 UC3854A/B and UC3855A/B Provide Power Limiting with Sinusoidal Input (Rev. A)
    PDF, 80 Kb, Revisión: A, Archivo publicado: nov 6, 2001
  • Accurate PWM Duty Cycle Clamp
    PDF, 58 Kb, Archivo publicado: enero 25, 2002
    Power supply applications using current sense transformers require a duty cycle clamp on the pulse width modulator (PWM) to ensure transformer reset. Not all PWMs come with a duty cycle clamp presenting a problem for the power supply designer. This application note shows how to implement a duty cycle clamp by using a simple delay circuit.

Linea modelo

Serie: UCC28500 (3)

Clasificación del fabricante

  • Semiconductors > Power Management > Offline and Isolated DC/DC Controllers and Converters > Power Factor Correction