Datasheet Texas Instruments BQ24080DRCTG4 — Ficha de datos

FabricanteTexas Instruments
SerieBQ24080
Numero de parteBQ24080DRCTG4
Datasheet Texas Instruments BQ24080DRCTG4

Cargador de iones de litio de 1 celda con FET 1-A, CA presente y carga habilitada 10-VSON -40 a 85

Hojas de datos

BQ24080, BQ24081 1-A, Single-Chip, Li-Ion and Li-Pol Charger IC datasheet
PDF, 1.9 Mb, Revisión: F, Archivo publicado: mayo 8, 2017
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin10
Package TypeDRC
Industry STD TermVSON
JEDEC CodeS-PDSO-N
Package QTY250
CarrierSMALL T&R
Device MarkingBRO
Width (mm)3
Length (mm)3
Thickness (mm).9
Pitch (mm).5
Max Height (mm)1
Mechanical DataDescargar

Paramétricos

Absolute Vin (safety rating)(Max)(7 V
Battery Charge Voltage(Max)4.2 V
Battery Charge Voltage(Min)4.2 V
Cell ChemistryLi-Ion/Li-Polymer
Charge Current(Max)1 A
Control InterfaceStandalone (RC-Settable)
Control TopologyLinear
Number of Series Cells1
Operating Vin(Max)6.5 V
Operating Vin(Min)4.5 V
Package GroupVSON
Package Size: mm2:W x L10VSON: 9 mm2: 3 x 3(VSON) PKG
Special FeaturesIntegrated FET,Temp Monitoring (Thermistor Pin)
USB FeatureN/A

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: BQ24080EVM
    bq24080 Evaluation Module
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • bq24080 Single Cell Li-Ion Battery Charger with Modified Precharge
    PDF, 123 Kb, Archivo publicado: enero 25, 2008
    This application report demonstrates an easy way to modify the precharge current level and the fast-charge current level. Some applications may require the system to run below the VLOWV threshold, 3 V, where the precharge current is programmed to one-tenth of the fast-charge current. The precharge current may not be sufficient to charge the cell and power the system and may not need to
  • Battery-charger front-end IC improves charging-system safety
    PDF, 199 Kb, Archivo publicado: mayo 16, 2008
  • Extending Single Input Charger to Dual Input Applications (Rev. A)
    PDF, 256 Kb, Revisión: A, Archivo publicado: sept 21, 2009
  • Achieving Different Charge Voltage for bq2408x
    PDF, 110 Kb, Archivo publicado: abr 29, 2009
    By changing standard 4.2-V charge voltage to 4.1 V or lower, rechargeable lithium-ion (Li-ion) battery cycle life can be extended at low temperature. For new chemistry such as LiFePO4 rechargeable battery, it requires 3.6-V charge voltage. All these new applications need a nonstandard charge voltage. This application report gives examples of using the 4.2-V bq24085 charger to achieve different cha
  • How to Achieve Power-Path Management Function for bq2408x (Rev. A)
    PDF, 174 Kb, Revisión: A, Archivo publicado: abr 21, 2009
    This application report presents a simple external circuit for achieving a power-path management function while maintaining an overvoltage protection function and blocking reverse current for low-cost linear battery chargers such as the bq2408x . Brief design criteria and a trade-off study with test results are presented.
  • Q2 2008 Issue Analog Applications Journal
    PDF, 1.3 Mb, Archivo publicado: mayo 16, 2008
    This document holds articles for specific application examples and technologies. It also includes a selection guide for antennas in low-power RF applications.

Linea modelo

Clasificación del fabricante

  • Semiconductors > Power Management > Battery Management Products > Battery Charger IC