2N3904 / MMBT3904 / PZT3904
NPN General-Purpose Amplifier
Description
This device is designed as a general-purpose amplifier
and switch. The useful dynamic range extends to 100
mA as a switch and to 100 MHz as an amplifier. 2N3904 PZT3904 MMBT3904
C C E E
TO-92 SOT-23 EBC Mark:1A C
SOT-223 B B Ordering Information
Part Number Marking Package Packing Method Pack Quantity 2N3904BU 2N3904 TO-92 3L Bulk 10000 2N3904TA 2N3904 TO-92 3L Ammo 2000 2N3904TAR 2N3904 TO-92 3L Ammo 2000 2N3904TF 2N3904 TO-92 3L Tape and Reel 2000 2N3904TFR 2N3904 TO-92 3L Tape and Reel 2000 MMBT3904 1A SOT-23 3L Tape and Reel 3000 PZT3904 3904 SOT-223 4L Tape and Reel 2500 © 2002 Fairchild Semiconductor Corporation
2N3904 / MMBT3904 / PZT3904 Rev. 1.1.0 www.fairchildsemi.com 2N3904 / MMBT3904 / PZT3904 — NPN General-Purpose Amplifier October 2014 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted. Symbol Parameter Value Unit VCEO Collector-Emitter Voltage 40 V VCBO Collector-Base Voltage 60 V VEBO Emitter-Base Voltage 6.0 V 200 mA -55 to 150 °C IC
TJ, TSTG Collector Current -Continuous
Operating and Storage Junction Temperature Range Notes:
1. These ratings are based on a maximum junction temperature of 150°C.
2. These are steady-state limits. Fairchild Semiconductor should be consulted on applications involving pulsed or
low-duty cycle operations. Thermal Characteristics
Values are at TA = 25°C unless otherwise noted. Symbol
PD Maximum Parameter
Total Device Dissipation Unit 2N3904 MMBT3904(3) PZT3904(4) 625 350 1,000 mW 2.8 8.0 mW/°C Derate Above 25°C 5.0 RθJC Thermal Resistance, Junction to Case 83.3 RθJA Thermal Resistance, Junction to Ambient 200 °C/W
357 125 °C/W Notes:
3. Device is mounted on FR-4 PCB 1.6 inch X 1.6 inch X 0.06 inch.
4. Device is mounted on FR-4 PCB 36 mm X 18 mm X 1.5 mm, mounting pad for the collector lead minimum 6 cm2. © 2002 Fairchild Semiconductor Corporation
…