Datasheet Texas Instruments LDC1612DNTR — Ficha de datos

Fabricante	Texas Instruments
Serie	LDC1612
Numero de parte	LDC1612DNTR

Hojas de datos

Precios

Estado

Embalaje

Paramétricos

Plan ecológico

Kits de diseño y Módulos de evaluación

• Evaluation Modules & Boards: LDCCOILEVM
  Reference Coil Board Evaluation Module
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar
• Evaluation Modules & Boards: LDC1612EVM
  LDC1612 Evaluation Module for Inductance to Digital Converter with Sample PCB Coils
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar

Notas de aplicación

• Descargar
  Inductive Sensing Touch-On-Metal Buttons Design Guide
  PDF, 2.6 Mb, Archivo publicado: marzo 30, 2016
• Descargar
  LDC1612 LDC1614 Linear Position Sensing
  PDF, 239 Kb, Archivo publicado: abr 20, 2015
  This application note explains how both approaches can be used to determine the position of a target that is moved laterally above the sensor coil and provides system design guidelines for each approach. Resolution calculations are based on the 28-bit devices LDC1612 and LDC1614, but the same principles apply to other LDCs such as LDC1000, LDC1041, LDC1312, and LDC1314.
• Descargar
  Power Reduction Techniques for the LDC131x/161x for Inductive Sensing
  PDF, 215 Kb, Archivo publicado: marzo 18, 2016
  Inductive sensing is a contactless technique for applications ranging from position or motion measurement of a conductive target to detection of spring compression or extension. Depending on the specific application, there are different system requirements regarding sensitivity, responsiveness, and power. Power consumption is a key parameter for many applications, including wearables, consumer ele
• Descargar
  Optimizing L Measurement Resolution for the LDC161x and LDC1101
  PDF, 108 Kb, Archivo publicado: feb 12, 2016
• Descargar
  LDC1312, LDC1314, LDC1612, LDC1614 Sensor Status Monitoring
  PDF, 102 Kb, Archivo publicado: oct 9, 2016
  TI’s multichannel inductance-to-digital converters (LDCs) LDC1612, LDC1614, LDC1312 and LDC1314feature three different methods for reporting conversion status information including errors, warnings, andcompleted conversion results. Information is available through the data registers, the status registers, andthe INTB pin of the device. This application note explains usage and interpretation
• Descargar
  Configuring Inductive-to-Digital-Converters for Parallel Resistance (RP) Variati (Rev. A)
  PDF, 255 Kb, Revisión: A, Archivo publicado: jun 1, 2015
  This application note reviews sensor RP configuration for LDC devices. LDC1000, LDC1041, LDC1051, LDC1312, LDC1314, LDC1612, LDC1614 are covered in this note. Clear understanding on how to set the RP_MIN and RP_MAX registers is necessary for not only RP measurements, but also for optimum L measurements. The fundamental principle of RP measurements is that magnetic fields from an LC circuit ge
• Descargar
  Setting LDC1312/4, LDC1612/4, and LDC1101 Sensor Drive Configuration
  PDF, 298 Kb, Archivo publicado: abr 5, 2016
• Descargar
  EMI Considerations for Inductive Sensing
  PDF, 151 Kb, Archivo publicado: feb 22, 2017
  This application note explains various EMI reduction techniques to help improve EMI performance for TI'sInductance-to-Digital Converters (LDC). Each section details a general technique with references to otheruseful online documents. A list of relevant EMI reduction techniques is provided for specific devices withinthe LDC family of products.
• Descargar
  LDC Device Selection Guide (Rev. B)
  PDF, 360 Kb, Revisión: B, Archivo publicado: marzo 21, 2017
• Descargar
  LDC Sensor Design
  PDF, 1.0 Mb, Archivo publicado: marzo 24, 2015
  Getting the best performance out of an LDC requires a sensor suitable for the measurement. This app-note covers the parameters to consider when designing a sensor for a specific application. Specific areas of focus include the physical routing characteristics of PCB based sensors, considerations for the sensor capacitor, and techniques to minimize or compensate for parasitic effects.
• Descargar
  LDC1xxx LDC Target Design (Rev. A)
  PDF, 907 Kb, Revisión: A, Archivo publicado: mayo 9, 2017
  Texas Instruments’ Inductive-to-Digital Converter (LDC) technology can accurately measure with a wide variety of target sizes, shapes, and material composition. There are several target design guidelines to maximize the effectiveness of an LDC measurement system. This application note covers the relevant factors of target design that affect inductive sensing, and provides guide
• Descargar
  Measuring Rp of an L-C Sensor for Inductive Sensing
  PDF, 205 Kb, Archivo publicado: oct 1, 2015
  When designing an application using TI’s LDC series of inductive sensors, it is necessary to know the L-C sensor’s equivalent parallel resistance RP at the sensor’s resonant frequency. The RP value changes as the target is moved; the minimum RP occurs when the metal target is closest to the sensor. The maximum RP occurs when the target is at the farthest distance. Accordingly, both values should b

Linea modelo

Clasificación del fabricante

• Semiconductors > Sensing Products > Inductive Sensing > Inductance to Digital Converters