Datasheet Linear Technology LTC3245EMSE#TRPBF — Ficha de datos

Fabricante	Linear Technology
Serie	LTC3245
Numero de parte	LTC3245EMSE#TRPBF

Amplio rango VIN, bajo nivel de ruido, bomba de carga Buck-Boost de 250 mA

Hojas de datos

Descargar

PDF, 550 Kb, Revisión: A, Archivo subido: jul 31, 2016

Extracto del documento

Precios

Embalaje

Package	MS-12E
Package Code	MSE
Package Index	05-08-1666

Paramétricos

Demo Boards	DC1802A
Design Tools	LTspice Model
Export Control	no
Frequency	450 kHz
Function	Regulated Buck-Boost Charge Pump
Ishutdown	4 µA
Isupply	0.018 mA
Number of Outputs	1
Operating Temperature Range	0 to 85 °C
Output Current	0.25 A
Output Voltage	Fixed 3.3V, 5V or Adjustable (2.5V to 5V)
Vin Max	38 V
Vin Min	2.7 V

Plan ecológico

RoHS

Obediente

Artículos

Descargar
2.7V to 38V VIN Range, Low Noise, 250mA Buck-Boost Charge Pump Converter &mdash LT Journal
PDF, 230 Kb, Archivo publicado: enero 6, 2014
Extracto del documento
design features 2.7V to 38V VIN Range, Low Noise, 250mA Buck-Boost
Charge Pump Converter
George H. Barbehenn The LTC3245 is a buck-boost regulator that dispenses with the traditional inductor,
and instead uses a capacitor charge pump. The LTC3245вЂ™s input voltage range is
2.7V to 38V, and it can be used without a feedback divider to produce one of two
fixed output voltages, 3.3V and 5V, or programmed via a feedback divider to any
output voltage from 2.5V to 5.5V. Maximum output current is 250mA. As a result of
its buck-boost topology, the LTC3245 is capable of regulating a voltage above or
below the input voltage, allowing it to satisfy automobile cold crank requirements.
The LTC3245 achieves efficiency of
80% when delivering 5V, 100m A from
a 12V source, significantly higher efficiency than an LDO, making it possible
to avoid the space and cost requirements of an LDO with a heat sink. The
LTC3245 is available in an exposed
pad MSOP12 or 3mm Г— 4mm DFN12. Because N and M are integers, a straight
charge pump cannot be used to produce an arbitrary output. Instead the
controller modifies VIN to produce VINвЂІ,
which is then fed to the charge pump.
The charge pump can operate in one of
three modes, buck, LDO or boost, resulting in ВЅVINвЂІ, VINвЂІ or 2VINвЂІ, respectively. CHARGE PUMP OPERATION By properly controlling both VINвЂІ and
the operating mode of the charge pump
any arbitrary voltage can be achieved.
When operating in buck mode, the …

Linea modelo

Serie: LTC3245 (12)

LTC3245EDE#PBF LTC3245EDE#TRPBF LTC3245EMSE#PBF LTC3245EMSE#TRPBF LTC3245HMSE#PBF LTC3245HMSE#TRPBF LTC3245IDE#PBF LTC3245IDE#TRPBF LTC3245IMSE#PBF LTC3245IMSE#TRPBF LTC3245MPMSE#PBF LTC3245MPMSE#TRPBF

Clasificación del fabricante

Power Management > Inductorless (Charge Pump) DC/DC Converters > High Voltage Charge Pumps | Regulated Buck-Boost Charge Pumps
Space & Harsh Environment > Extended Temperature Plastic (H & MP) > Extended Temperature (H & MP) Power Management

Otros nombres:

LTC3245EMSETRPBF, LTC3245EMSE TRPBF