Datasheet MAXQ1004-B01+ - Maxim 16- bit Microcontrollers - MCU 1-Wire and SPI Authentication MCU — Ficha de datos

Part Number: MAXQ1004-B01+

Descripción detallada

Manufacturer: Maxim

Description: 16- bit Microcontrollers - MCU 1-Wire and SPI Authentication MCU

Docket:
19-5258; Rev 0; 4/10
1-Wire and SPI Authentication Microcontroller
General Description
The MAXQ1004 is a low-power microcontroller that integrates a 10-bit ADC, 1-WireM slave interface, SPIK, AES encryption, random-number generator (RNG), and temperature sensor with a 16-bit MAXQM pipelined CPU.

Performance bandwidth is sufficient to handle master or slave challenge-response authentication in portable devices. The device incorporates 16KB of flash memory and 640B of RAM. Factory programming of a customer secret key is available upon request. The microcontroller runs within a wide 1.7V to 3.6V operating range. For the ultimate in low-power performance, an ultra-lowpower stop mode (300nA typ) is available. In this mode, only a minimum amount of circuitry is powered to support detection of the start of a 1-Wire transaction. When 1-Wire activity is detected, the microcontroller is turned on and the command is executed in an atomic fashion. This allows for stateless operation between comma

Specifications:

A/D Channels Available: 1
Clock Frequency Max: 6 MHz
Core: MAXQ20
Data Bus Width: 16 bit
Interface: 1-Wire, JTAG, SPI, TAP
Mounting Style: SMD/SMT
Number of Timers: 1
Number of bits in ADC: 10 bit
On-Chip ADC: Yes
Operating Supply Voltage: 1.7 V to 3.6 V
Operating Temperature Range: - 40 C to + 85 C
Package / Case: TQFN-EP-16
Packaging Type: Tube
Processor Series: MAXQ1004
Program Memory Size: 16 Kb
Program Memory Type: Flash
RAM Size: 640 B
RoHS: Yes
Part Aliases: 90-M1004+B01

Otros nombres:

MAXQ1004B01+, MAXQ1004 B01+