Datasheet Texas Instruments LM3S9U92-IQC80-A2 — Ficha de datos

Fabricante	Texas Instruments
Serie	LM3S9U92
Numero de parte	LM3S9U92-IQC80-A2

Hojas de datos

Precios

Estado

Embalaje

Plan ecológico

Notas de aplicación

• Descargar
  Using Execute, Write/Erase Flash Protection on Stellaris MCUs Using CCS (Rev. A)
  PDF, 1.7 Mb, Revisión: A, Archivo publicado: agosto 15, 2012
  Protection of code and IP in a microcontroller's Flash memory has always been an important consideration for the system designers. StellarisВ® microcontrollers feature a code protection mechanism that enables developers to protect their code and IP in the end application, while providing the flexibility to upgrade the firmware using a boot loader. This application report describes using Flash p
• Descargar
  Stellaris Application Update Using Stellaris USB DFU Class (AN01273) (Rev. A)
  PDF, 116 Kb, Revisión: A, Archivo publicado: jul 8, 2013
  This application report provides a brief overview of the Device Firmware Upgrade (DFU) class, describes the Stellaris implementation in the USB boot loader (boot_usb) application, and also describes the hostside lmdfu dynamic link library for Windows. Use of the standard USB DFU class on Stellaris USBenabled microcontrollers offers a convenient and fast method of replacing main application image
• Descargar
  Programming the On-Chip Flash Memory in a Stellaris Microcontroller (AN01237)
  PDF, 95 Kb, Archivo publicado: jul 7, 2009
  This application note provides three methods for erasing and programming Flash memory: the StellarisWare Peripheral DriverLib, software polling for completed updates, and interrupt-driven updates.
• Descargar
  System Design Guidelines for StellarisВ® Microcontrollers В  (Rev. B)
  PDF, 278 Kb, Revisión: B, Archivo publicado: feb 4, 2013
• Descargar
  Using the Stellaris Microcontroller Analog-to-Digital Converter (AN01247)
  PDF, 170 Kb, Archivo publicado: jul 7, 2009
  This application note describes ADC sampling and configuring Stellaris microcontrollers through the StellarisWare Peripheral Driver Library or through direct writes to the device's control registers.
• Descargar
  Serial-to-Ethernet Converter for Stellaris Microcontrollers (AN01266)
  PDF, 89 Kb, Archivo publicado: jul 7, 2009
  The software described in this application note allows an Ethernet-enabled Stellaris microcontroller to be used as a serial-to-Ethernet converter.
• Descargar
  Using the Stellaris Ethernet Controller with Lightweight IP (lwIP) (AN01261) (Rev. C)
  PDF, 70 Kb, Revisión: C, Archivo publicado: sept 8, 2012
• Descargar
  Using SYS/BIOS with StellarisВ® ARMВ® Cortexв„ў-M3 Microcontrollers (Rev. A)
  PDF, 1.4 Mb, Revisión: A, Archivo publicado: nov 19, 2012
  This document provides a brief overview of the Texas Instruments’ SYS/BIOS Real-Time Operating System (RTOS) and outlines how to implement SYS/BIOS on the Stellaris® Cortex™-M3 family of microcontrollers. In addition to setting up and running an example project provided within the SYS/BIOS software package, this document outlines the process of creating a new SYS/BIOS project with the Code Compose
• Descargar
  Differences Among StellarisВ® LM3S and Tivaв„ў C Series TM4C123x MCUs (Rev. E)
  PDF, 162 Kb, Revisión: E, Archivo publicado: sept 24, 2013
  is document addresses design items to be aware of when migrating working designs among Fury-, DustDevil-, Tempest-, and Firestorm-StellarisВ® microcontrollers (MCUs) and Tivaв„ў C Series TM4C123x-class MCUs. Topics covered include both software and hardware issues as well as feature changes and enhancements. All software issues are comprehended in the Driver Library APIs. As a result, syste
• Descargar
  Configuring StellarisВ® Tempest- and Firestorm-Class and MCUs W/ Pin Multiplexing (Rev. C)
  PDF, 172 Kb, Revisión: C, Archivo publicado: nov 6, 2013
  Many members of the StellarisВ® family of microcontrollers provide system designers with a great deal of control over the placement and selection of peripheral module signals that are alternate functions for GPIO signals. This application note provides an overview of the pin muxing implementation, an explanation of how a system designer defines a pin configuration, and examples of the pin confi
• Descargar
  Using the Stellaris Serial Flash Loader (AN01242)
  PDF, 120 Kb, Archivo publicado: jul 7, 2009
  This application note describes how to communicate with the Stellaris serial flash loader application.
• Descargar
  USB Certification for Stellaris-Based USB Peripherals and Embedded Host Systems
  PDF, 3.9 Mb, Archivo publicado: jul 7, 2009
  This application note describes the USB-IF certification process for a USB full-speed device and a USB full-speed embedded host system using the a Stellaris LM3S5732 microcontroller as the example.
• Descargar
  Using a 9-bit Software UART with Stellaris (AN01280)
  PDF, 301 Kb, Archivo publicado: jul 7, 2009
  This application note describes how to extend the functionality of the standard hardware UART available on StellarisВ® microcontrollers by using the 9-bit UART add-on.
• Descargar
  Optimizing Code Performance and Size for Stellaris Microcontrollers (AN01265)
  PDF, 161 Kb, Archivo publicado: jul 7, 2009
  This application note provides a summary of factors that affect code performance and size for StellarisВ® microcontrollers and suggestions to improve code performance and size including example code.
• Descargar
  StellarisВ® LM3S ADC Calibration (AN01282) (Rev. C)
  PDF, 127 Kb, Revisión: C, Archivo publicado: nov 1, 2012
  This application report describes a method for improving the absolute accuracy of the analog-to-digital converters (ADCs) found on StellarisВ® LM3S microcontrollers. Due to inherent gain and offset errors, the absolute accuracy of the ADC is affected. The methods described in this application report can improve the absolute accuracy of the ADC results.
• Descargar
  Using Stellaris MCUs Internal Flash Memory to Emulate EEPROM (AN01267)
  PDF, 91 Kb, Archivo publicado: jul 7, 2009
  This application note describes how to emulate EEPROM using the internal Flash memory and provides an example application that uses EEPROM emulation drivers.
• Descargar
  Software UART for Stellaris Microcontrollers (AN01270)
  PDF, 77 Kb, Archivo publicado: jul 7, 2009
  This application note looks at implementing a software-based UART which, using general-purpose input/outputs (GPIO), allows the user to overcome hardware limitations or lack of dedicated peripherals.
• Descargar
  ADC Oversampling Techniques for Stellaris Microcontrollers (AN01239) (Rev. A)
  PDF, 95 Kb, Revisión: A, Archivo publicado: enero 8, 2013
  Some members of the Stellaris microcontroller family have an analog-to-digital converter (ADC) module. The hardware resolution of the ADC is 10 bits; however, due to noise and other accuracy diminishing factors, the true accuracy is less than 10 bits. This application report provides a software-based oversampling technique, resulting in an improved effective number of bits (ENOB) in the conversion
• Descargar
  Using the Stellaris Ethernet Controller with Micro IP (uIP) (AN01260) (Rev. B)
  PDF, 128 Kb, Revisión: B, Archivo publicado: enero 11, 2010
  This application note gives an overview of the uIP TCP/IP stack followed by a discussion of uIP application examples provided for Stellaris evaluation boards with Ethernet controllers.
• Descargar
  Implementing RS-232 Flow Control on a Stellaris Microcontroller (AN01255)
  PDF, 74 Kb, Archivo publicado: jul 7, 2009
  This application note describes how to implement flow control by using the Stellaris GPIO module with its interrupt support.

Linea modelo

Clasificación del fabricante

• Semiconductors > Microcontrollers (MCU) > Performance MCUs > Control + Automation > LM3S Cortex-M3 Series

Otros nombres:

LM3S9U92IQC80A2, LM3S9U92 IQC80 A2