Datasheet NCP348MTTBG - ON Semiconductor IC, OVERVOLTAG PROTECTION CONTROLLER — Ficha de datos

Descripción detallada

Manufacturer: ON Semiconductor

Description: IC, OVERVOLTAG PROTECTION CONTROLLER

Download Data Sheet

Docket:
NCP348, NCP348AE Positive Overvoltage Protection Controller with Internal Low RON NMOS FET and Status FLAG
The NCP348 is able to disconnect the systems from its output pin in case wrong input operating conditions are detected.

The system is positive overvoltage protected up to +28 V. Due to this device using internal NMOS, no external device is necessary, reducing the system cost and the PCB area of the application board. The NCP348 is able to instantaneously disconnect the output from the input, due to integrated Low RON Power NMOS (65 mW), if the input voltage exceeds the overvoltage threshold (OVLO) or undervoltage threshold (UVLO). At powerup (EN pin = low level), the Vout turns on 50 ms after the Vin exceeds the undervoltage threshold. The NCP348 provides a negative going flag (FLAG) output, which alerts the system that a fault has occurred. In addition, the device has ESD-protected input (15 kV Air) when bypassed with a 1.0 mF or larger capacitor.
Features http://onsemi.com MARKI

Specifications:

• Base Number: 348
• Battery IC Case Style: WDFN
• Battery Protection: Over Voltage
• Battery Type: Lithium
• Frequency: 200 kHz
• Input Voltage Max: 28 V
• Mounting Type: SMD
• Number of Batteries: 1
• Number of Pins: 10
• Operating Temperature Range: -40°C to +85°C
• Package / Case: WDFN
• Supply Voltage Range: 1.2 V to 28 V
• Supply Voltage Vcc: 1.2 V
• RoHS: Yes
• SVHC: No SVHC (18-Jun-2012)