Datasheet Texas Instruments MSP430G2230IDR — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | MSP430G2230 |
| Numero de parte | MSP430G2230IDR |
MSP430G22x0 Microcontrolador de señal mixta 8-SOIC -40 a 85
Hojas de datos
MSP430G22x0 Mixed Signal Microcontroller datasheet
PDF, 1.2 Mb, Revisión: E, Archivo publicado: feb 7, 2013
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí |
Embalaje
| Pin | 8 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 2500 |
| Carrier | LARGE T&R |
| Device Marking | G2230 |
| Width (mm) | 3.91 |
| Length (mm) | 4.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Descargar |
Paramétricos
| ADC | ADC10 - 4ch |
| AES | N/A |
| Active Power | 220 uA/MHz |
| Additional Features | Watchdog,Temp Sensor,Brown Out Reset |
| BSL | None |
| CPU | MSP430 |
| DMA | 1 |
| Featured | g2 |
| Frequency | 16 MHz |
| GPIO Pins | 4 |
| I2C | 1 |
| Max VCC | 3.6 |
| Min VCC | 1.8 |
| Multiplier | N/A |
| Non-volatile Memory | 2 KB |
| Operating Temperature Range | -40 to 85 C |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| RAM | 0.125 KB |
| Rating | Catalog |
| SPI | 1 |
| Special I/O | N/A |
| Standby Power | 0.5 LPM3-uA |
| Timers - 16-bit | 1 |
| Wakeup Time | 1 us |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: MSP-FET430U8
MSP-FET430U8 - 8-pin Target Development Board and MSP-FET Programmer Bundle for MSP430G2x MCUs
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: MSP-TS430D8
MSP-TS430D8 - 8-pin Target Development Board for MSP430G2x MCUs
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Development Kits: MSP-FET430U28A
28-pin Target Development Board and MSP-FET USB Programmer Bundle for MSP430F2x and MSP430G2x MCUs
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - JTAG Emulators/ Analyzers: ENERGYTRACE
MSP EnergyTrace Technology
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Migrating From MSP430 F2xx and G2xx Families to MSP430 FR4xx and FR2xx Family (Rev. E)PDF, 237 Kb, Revisión: E, Archivo publicado: mayo 4, 2018
This application report helps to ease the migration from MSP430F2xx flash-based MCUs to the MSP430FR4xx and MSP430FR2xx family of FRAM-based MCUs. It discusses programming system hardware core architecture and peripheral considerations. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR4xx and MSP430FR2xx devices see the MSP430 - Migrating from the MSP430F2xx,G2xx Family to the MSP430FR58xx/FR59xx/68xx/69xx (Rev. E)PDF, 179 Kb, Revisión: E, Archivo publicado: nov 3, 2016
This application report enables easy migration from MSP430F2xx flash-based MCUs to the MSP430FR58xx/FR59xx/68xx/69xx family of FRAM-based MCUs. For the migration guide to MSP430FR57xx, see Migrating From the MSP430F2xx Family to the MSP430FR57xx Family. It covers programming, system, and peripheral considerations when migrating firmware. The intent is to highlight key differences between the two f
Linea modelo
Serie: MSP430G2230 (2)
- MSP430G2230ID MSP430G2230IDR
Clasificación del fabricante
- Semiconductors > Microcontrollers (MCU) > MSP430 ultra-low-power MCUs > MSP430G2x/i2x